JVC CA-MXS5RMD manual Recording CDs, Synchronized Recording, First Track Recording

Recording CDs

You have two methods to record from a CD onto an MD.

•Synchronized Recording — Records the entire CD or the program you have made.

•First Track Recording — Records the first track of each CD.

To record a single track during play or pause

Press CD 3 MD while playing back or pausing a CD track you want to record.

The playback of that CD track is stopped, and the same track starts playing from the beginning again. This time, the MD recorder starts recording the CD track.

•When the track is recorded, both the CD player and the MD recorder stop.

Synchronized Recording

This is the easiest way of CD recording. At a press of the button, you can start playing a CD and recording on an MD.

On the unit ONLY:

1 Insert a recordable MD into the MD loading slot.

2 Prepare a CD.

•Place a CD on one of the disc tray (CD 1, CD 2, or CD 3), press the corresponding disc number button (CD 1, CD 2, or CD 3), then 7 before going to the next step. Make sure that the correct disc number lamp lights on the unit.

•You can make a program if you want (see page 26).

3 Press CD 3 MD.

The recording lamp on the unit lights, and recording starts.

Remaining playback time

Recording time remaining on the MD

When recording ends, both the CD player and the MD recorder stop automatically.

To stop recording, press 7. “WRITING” appears for a while.

Both the CD player and the MD recorder stop.

First Track Recording

First Track Recording allows you to record the first track of each loaded CD. You can, for example, make a directory of all your best CDs.

On the unit ONLY:

1 Insert a recordable MD into the MD loading slot.

2 Prepare a CD.

•Always place a CD on the CD 1 tray. If not, this function does not work.

3 Press 1ST TRACK REC.

The recording lamp on the unit lights, and First Track Recording starts from the CD on the CD 1 tray.

When the first track of the CD on the CD 1 tray is recorded, the first track of the CD on the CD 2 tray will be recorded. Recording continues until the first track of each loaded CD is recorded.

4 Replace the CDs on the trays whose disc number lamp is not lit green.

•You can change CDs to continue the First Track Recording using more than 3 CDs.

When the first track of the last loaded CD is recorded, First Track Recording stops.

To stop recording, press 7. “WRITING” appears for a while.

Both the CD player and the MD recorder stop.

– 35 –