JVC CA-MXS5RMD manual Divide Function, First track or the current track start playing

Page 43

Continued

DIVIDE Function

This function allows you to divide one track into two separate tracks. It is useful, for example, when you want to add track marks at a certain point within a track or if you want to separate a recording.

• To stop any time during editing process, press EDIT.

On the unit ONLY:

1 Insert an MD you want to edit into the MD loading slot.

2 Press EDIT.

The source is changed to “MD,” and the MD recorder enters editing mode (with DIVIDE function selected).

3 Press SET.

The first track (or the current track) start playing.

4 Push the joy control rightward (¢ ) or leftward (4 ) to select the track you want to divide.

The selected track starts playing.

Ex. When you want to divide track 5

If the track has a title, it is show here.

•If you do not push the joy control rightward (¢ ) or leftward (4 ), the same track plays repeatedly.

•You can push the joy control upward (` ) or downward (1 ) to find the dividing point.

5 Press SET when you find the point where you want to divide the track.

The MD recorder repeats the selected point — a 3- second period following the dividing point.

•If the dividing point is satisfactory, go to step 7.

•If the dividing point is not satisfactory, go to the next step.

6 Push and hold the joy control rightward (¢ ) or leftward (4 ) to precisely adjust the dividing point.

•You can shift the dividing point up to ±128. This range (±128) corresponds to approximately ±8 seconds from the original point (Position 0).

Ex. When adjusting the point by +20

When you stop holding the joy control, the unit repeats the newly selected dividing point.

•When you find the right position, go to the next step.

•If you want to cancel the dividing point, press CANCEL, then select the correct dividing point.

7 Press SET.

8 Press ENTER/DEMO to finish the editing procedure.

9 Press 0for the MD recorder to eject the MD.

“WRITING” appears while the editing you have made is being recorded on the MD.

To join the divided tracks again, see the JOIN function.

– 40 –

Page 42 Page 44
Image 43
Page 42 Page 44
Contents CA-MXS5RMD If in Doubt Consult a Competent Electrician Class Laser Product Introduction PrecautionsContents Front Panel Display Window Location of the Buttons and ControlsBecome familiar with the buttons and controls on your unit About the indications in the main display Front PanelSee pages in the parentheses for details CD 0open/close buttonsFM/AM button 15 Remote ControlRemote Control Disc number buttons CD 1, CD 2, and CDFM antenna Connecting AntennasGetting Started UnpackingTo connect an outdoor AM antenna Connecting SpeakersYou can connect the speakers using the speaker cords AM antennaTo connect a cassette deck Connecting Other EquipmentTo start the display demonstration manually Putting the Batteries into the Remote ControlSee Changing the Main Display Screen on Remote control Basic SettingsTo switch off the power supply completely, unplug Turning On the PowerSetting the Clock To adjust the clock againChanging the Main Display Screen How these settings workNormal screens To change the brightness To store the selected main display screen in backup memoryPress SET to finish the adjustment Changing the Display Brightness and ContrastBasic and Common Operations Reinforcing the Bass Sound Adjusting the VolumeTo turn down the volume level temporarily Selecting the Sources and Starting PlaySelecting the Sound Modes Creating Your Own Sound Mode Manual ModeTo use your own sound mode Manual modeListening to FM and AM MW/LW Broadcasts Presetting Stations Tuning in a StationTo change the FM reception mode Receiving FM Stations with RDS Tuning in a Preset StationMore about RDS If No PS, PTY, or RT signals are sent by a stationChanging the RDS Information Searching for Programs by PTY Codes PTY SearchInfo Switching to a Program Type of Your Choice TemporarilyPress PTY Search again NewsTest function Alarm functionMore about the EON function Description of the PTY codes Playing Back CDs To exchange CDs during playback of another Loading CDsPlaying Back the Entire Discs Continuous Play Basic CD OperationsTo go to another track To go to another track directly using the number buttonsProgram Play To stop playback for a momentTo modify the program To check the program contentsPlaying at Random Random Play Repeating Tracks or CDs Repeat PlayPlaying Back an MD Press MD # Basic MD OperationsTo locate a particular point in a track during play Insert an MD into the MD loading slotRepeat to program other tracks you want Press MD # Load an MDIf the total playing time exceed 150 minutes Tracks of the loaded MD will play at random Random play also stops when you eject the MDRepeating Tracks Repeat Play Prohibiting Disc Ejection Disc LockRecording on MDs To put a track mark manually while recording an Before You Start RecordingAbout the track marks To avoid erasing important recordingsFor details, see the manual supplied with your equipment Recording Any Sound Source Standard RecordingTo select the sound input level Recording lamp on the unit starts flashingSynchronized Recording Recording CDsFirst Track Recording To resume recording, press MD #/ 8 again Press PLAY/REC Mode on the unitSound Sync Select for a sound synchronized recording When selecting Stereo Press MD #Select for normal stereo RecordingEditing MDs Introducing MD Editing Functions To join the divided tracks again, see the Join function Divide FunctionFirst track or the current track start playing Selected track starts playingMove Function Join FunctionTo divide the joined tracks, see the Divide function Push the joy control downward 1 or upward Erase FunctionPress SET On the unit only SlotRepeat and 5 to select all the track you want to erase ALL Erase FunctionYou can select up to 15 tracks Making Your Own Titles and Screens Assigning Titles to an MD Title entry mode changes as followsPress SET to enter the selected title entry mode Title when the MD recorder stopsRepeat steps 5 and 6 to enter other characters Ex. When entering HInput a character Press ENTER/DEMO to finish the current title entryTo erase all the characters Changing the TitleYou can make a correction or change the title Make sure that the character you want to change is flashingPress the button for the next character you want to input Available Symbols are as followsPress Enter to finish the current title entry STANDBY/ON lamp lights red Creating Your Own Opening and Ending ScreensTo erase your own screen On the unit only Press to turn off the unit if it is onUsing the Timers Source changes as follows Using Recording TimerHow Recording Timer actually works REC indicator stops flashing, and remains litPress to turn off the unit on standby if necessary Using Daily TimerTo turn on or off Recording Timer after its setting is done How Daily Timer actually worksDaily indicator stops flashing and remains lit To set the hour of the timer-off time, thenTimer Priority Using Sleep TimerHow Sleep Timer actually works Handling CDs MaintenanceTo clean the CD General NotesAtrac Adaptive TRansform Acoustic Coding Utoc User Table Of ContentsAdditional Information MD Disc TypesMD limitations Sound Skip Guard MemoryMD Messages When you turn on the unit in the Power Saving mode TroubleshootingSpecifications JVC 0899KSMMDWJEM

CA-MXS5RMD specifications

The JVC CA-MXS5RMD is a versatile and compact mini audio system that has been designed to deliver high-quality sound and user-friendly features. Its distinctive design and functionality make it an appealing choice for music enthusiasts who seek both style and performance.

One of the standout features of the JVC CA-MXS5RMD is its powerful sound output, thanks to its built-in amplifier and robust speaker configuration. The system is equipped with a 2-way speaker design, which includes a 20-watt RMS output for impressive sound clarity and depth. Whether you are listening to your favorite music tracks or enjoying a movie, the audio quality is sure to impress.

The CA-MXS5RMD comes with multiple audio playback options. It includes a CD player, which not only plays standard CDs but also supports CD-R and CD-RW formats. This allows users to enjoy their personal music collections with ease. Additionally, the system features an FM/AM radio tuner, giving you access to various radio stations for an enhanced listening experience.

In an era dominated by digital streaming, JVC has ensured the CA-MXS5RMD is compatible with modern devices. The inclusion of a front USB port allows users to play music directly from USB flash drives, making it convenient for those who prefer digital music sources. Furthermore, with an auxiliary input, users can connect their smartphones or other audio devices, broadening the sound options available.

Another notable characteristic of the JVC CA-MXS5RMD is its convenient remote control, which allows users to adjust volume, change tracks, and switch between modes from a distance. This feature enhances the overall user experience, making it easy to control the system without having to get up.

Design-wise, the JVC CA-MXS5RMD boasts a sleek and modern aesthetic that can easily fit into any home or office environment. Its compact size allows it to be placed on shelves or countertops without taking up too much space. The intuitive interface and LCD display ensure ease of use, enabling users to navigate through their audio options effortlessly.

In summary, the JVC CA-MXS5RMD is a well-rounded mini audio system that combines classic audio playback with modern connectivity options. Its powerful sound output, versatile playback features, and stylish design make it a great choice for anyone looking to enhance their audio experience. Whether for casual listening or entertaining guests, this audio system delivers a satisfying performance.
Top Page Image Contents