JVC CA-MXS5RMD manual Press PLAY/REC Mode on the unit, To resume recording, press MD #/ 8 again

Continued

Recording FM/AM (MW/LW) Broadcasts — Monaural Recording and Stereo Recording

When recording FM/AM (MW/LW) broadcasts, you can select one of the two recording methods — Monaural (Long) Recording and Stereo (Normal) Recording.

•Monaural (Long) Recording — Records both stereo program and monaural program in monaural. This allows you to record on an MD twice as long as the MD’s recording time (indicated on the package of the MD). For example, you can record a 120-minute program on a 60- minute MD, though recorded sound becomes monaural. (Reproduced sound through the speakers during Monaural recording also becomes monaural.)

•Stereo (Normal) Recording — Sound is recorded in stereo (both on the left and right audio channels). You can also use the Standard Recording method described on page 34 for Stereo Recording.

1 Insert a recordable MD into the MD loading slot.

2 Press FM/AM, then tune into a station you want.

• See “Tuning in a Station” on page 18.

3 Select the recording method — Monaural Recording or Stereo Recording.

1) Press PLAY/REC MODE on the unit.

Ex. When selecting “STEREO”

4 Press MD # / 8.

The recording lamp stops flashing and remain lit, and recording starts.

•The station frequency will be recorded as the track title.

To stop recording, press 7.

To stop recording for a moment, press REC PAUSE (or MD REC PAUSE on the remote control) again.

To resume recording, press MD #/ 8 again.

In the following cases, Monaural Recording is automatically canceled, and Stereo Recording resumes.

•When you turn off, then on the unit.

•When you change the source.

•When you eject the MD.

•When you change the band (FM or AM). If you change the stations but not change the band, Monaural Recording is not canceled.

Recording the External Equipment — Sound

Synchronized Recording and Stereo

Recording

2)Push the joy control upward (` ) or downward (1 ) to select the recording method you want, then press SET.

The recording lamp on the unit starts flashing.

•STEREO: Select for normal stereo recording

•MONO: Select for a long monaural recording

Ex. When selecting “MONO”

When recording from the external equipment, you can select one of the two recording methods — Sound Synchronized Recording and Stereo (Normal) Recording.

When the sound signal comes in through the AUX terminal, digital recording is performed.

•Sound Synchronized Recording — With this recording method, you can start recording automatically when the source sound comes into this unit through the TAPE jacks or the AUX terminal.

Sound Synchronized Recording will stop automatically if no sound comes in for more than 30 seconds.

Sound is recorded in stereo.

•Stereo (Normal) Recording — Sound is recorded in stereo (both on the left and right audio channels). You can also use the Standard Recording method described on page 34 for Stereo Recording.

– 36 –