8. Attach an Outer Handlebar Cover (67) and the | 8 |
Inner Handlebar Cover (68) around the Right Handlebar Leg (60) with two M4 x 16mm Screws (104).
Repeat this step for the other side of the elliptical exerciser.
. Apply a small amount of grease to the axle on the Right Handlebar Leg (60) and to a 19mm Wave Washer (66).
Identify the Right Pedal Arm (58), which is marked with a "Right" sticker, and orient it as shown.
Slide the 19mm Wave Washer (66) and the Right Pedal Arm (58) onto the Right Handlebar Leg (60).
Attach the Right Pedal Arm (58) with an M8 x 19mm Patch Screw (82), an Axle Cover (53), and an M8 x 25mm Washer (98); to avoid
breaking the Axle Cover, do not overtighten the Patch Screw.
Repeat this step for the Left Pedal Arm (not
shown).
104
60
67
68
Grease
8 53
82
58
9