Gold's Gym GGEL68108.0, 880 manual

Page 8

5.Insert the Roller (38) on the Left Pedal Arm (32) and the Roller on the Right Pedal Arm (33) into the sides of the Ramp (5).

Attach the Rear Ramp Cover (7) to the Ramp (5) with two M4 x 16mm Screws (97). See the inset drawing. Lift the Pedal Arm Latch (41) on the Left Pedal Arm (32), and set the end of the Left Pedal Arm on the left Crank Bushing Sleeve (54). Release the Pedal Arm Latch, and make sure that the Left Pedal Arm is securely connected to the Crank Bushing Sleeve.

Connect the Right Pedal Arm (not shown) to the right Crank Bushing Sleeve (not shown) in the same way.

5	97	7
	97	7
	33
	5	38
	32
32
41	54

8

Image 8

Contents QUESTIONS? Model No. GGEL68108.0 Serial NoTable of Contents Important Precautions Before YOU Begin Assembly Wrench A rubber malletPage Way Page Attach the Right Upper Body Arm 23 Same way Tip Avoid pinching the wires. Carefully insertAvoid pinching Wires Repeat this step with the Right Link Arm Attach the Right Link Arm 31 in the same way HOW to Fold and Unfold the Elliptical Exerciser HOW to USE the Elliptical ExerciserHOW to Plug in the Power Adapter HOW to Move the Elliptical Exerciser Console Diagram Features of the ConsoleFollow your progress with the display HOW to USE the Manual ModeSelect the manual mode Avoid moving your hands or gripping the con- tacts tightly Turn on the fan if desiredBegin pedaling to start the program HOW to USE a Preset ProgramSelect a preset program Select a heart rate program HOW to USE a Heart Rate ProgramEnter a target heart rate setting HOW to USE the Sound System Maintenance and Troubleshooting Console TroubleshootingHOW to Eliminate Rubbing of the Discs HOW to Adjust the BeltExercise Guidelines Exercise IntensityWorkout Guidelines Exercise FrequencySuggested Stretches Page Key No. Qty Description Key No. QtyQty Description Exploded Drawing A-Model No. GGEL68108.0 Exploded Drawing B-Model No. GGEL68108.0 Icon Health & FITNESS, INC., 1500 S W., LOGAN, UT Ordering Replacement PartsLimited Warranty