1.To make assembly easier,read the information on page 5 before you begin assembling the elliptical exerciser.
If there is a shipping bracket attached to the rear of the Folding Frame (not shown), remove the screw and the shipping bracket from the Folding Frame. Discard the screw and the ship- ping bracket.
See HOW TO FOLD AND UNFOLD THE ELLIPTICAL EXERCISER on page 12 and unfold the elliptical exerciser.
While another person lifts the front of the Frame (1), attach the Front Stabilizer (4) to the Frame with two M10 x 93mm Patch Screws (82) and two M10 Curved Washers (99).
2.While another person lifts the Folding Frame (2), attach the Rear Stabilizer (3) to the Folding Frame with two M10 x 93mm Patch Screws (82) and two M10 Curved Washers (99).
Next, tighten the Center Foot (95) into the Frame (1).
1 |
|
82 | 99 |
99 |
|
4 | 1 |
2 |
| |
1 |
| |
95 | 3 | |
99 | ||
2 | ||
99 | 82 |
6