Panasonic DMC-G2K operating instructions Using the Custom Menu, Off, P65

Advanced (Recording pictures)

Perform these settings if you need to.

Using the [CUSTOM] Menu

•In the Intelligent auto mode, only [GUIDE LINE], [LCD INFO.DISP.] and [REMAINING DISP.] can be set.

For details on how to select the [CUSTOM] menu settings, refer to P32.

[CUST. SET MEM.]

Up to 3 current camera settings can be registered as custom settings.

[ ] [ ] [ ]

•Refer to P108 for details.

[Fn BUTTON SET]

Assign [REC] Mode menu or [CUSTOM] menu to 4 button. It is convenient to register functions that are used often.

[FOCUS AREA SET]/[ASPECT RATIO]/[QUALITY]/ [METERING MODE]/[I.RESOLUTION]/[I.EXPOSURE]/ [EX. OPT. ZOOM]/[GUIDE LINE]/[ REC AREA]/

[REMAINING DISP.]

•When set to [FOCUS AREA SET], it is possible to display the position setting screen of either AF area or MF assist by pressing 4. Refer to P48, 79 and 83 for details.

•Refer to P126 for details about [REC] Mode menu.

•The camera will not be able to operate with 3/4/2/1 if the [DIRECT FOCUS AREA] (P138) is set to [ON]. Set using the Quick Menu (P33).

[HISTOGRAM]

This allows you to set either to display or not display the histogram. (P65)

[OFF]

[ON]: Position of the histogram can be set. Refer to P66 on how to set.

[GUIDE LINE]

This will set the pattern of guide lines displayed when taking a picture.

(P65)

[OFF]/[ ]/[ ]

[ ]: Position of the guide line can be set. Refer to P65 for how to set.

[HIGHLIGHT]

When the Auto Review function is activated or when playing back, white saturated areas appear blinking in black and white.

[OFF]/[ON]

136 VQT2S30