Panasonic DMC-G2K operating instructions Attaching the Lens Hood, Fitting to the mark

Preparation

Attaching the Lens Hood

In bright sunlight or backlight, the lens hood will minimize lens flare and ghosting. The lens hood cuts off excess lighting and improves the picture quality.

•Check that the camera is turned off.

•Close the flash.

To attach the lens hood (flower shape) that came with the 14–42 mm/F3.5–5.6 lens included in DMC-G2K

Insert the lens hood into the lens with the short sides at the top and bottom, and turn in the direction of the arrow until it stops.

A Fitting to the mark.

∫Temporarily storing the lens hood

1Turn the lens hood in the direction of the arrow to

detach it.

2 Reverse the lens hood and then attach it in the same way as shown previously.

• Attach the lens cap.

• When temporarily storing the lens hood, check that it is firmly attached and that it does not appear in the picture.

Note

•Hold the short sides of the flower shaped lens hood when attaching or detaching it.

•When taking pictures with flash with the lens hood attached, the lower portion of the photo may turn dark (vignetting effect) and the control of the flash may be disabled because the photo flash may be obscured by the lens hood. We recommend detaching the lens hood.

•When using the AF Assist Lamp in the dark, detach the lens hood.

22 VQT2S30