Panasonic DMC-G2K operating instructions How to Use the Touch Panel, Drag, About the Stylus pen

Before Use

How to Use the Touch Panel

You can operate by directly touching the LCD monitor (touch panel) with your finger.

∫ Touch

To touch and release the touch panel.

It is used to select an icon or picture.

• It may not operate properly when multiple icons are touched simultaneously, so try to touch the center of the icon.

∫Drag

A movement without releasing the touch panel.

It is used to change the range of displayed pictures, or switch the screen with the slide bar.

• If you select a wrong icon, you can drag to a different icon, and that icon will be selected by releasing your finger.

Note

• The touch panel does not operate when the LCD monitor is turned off.

• This touch panel is a type that detects pressure. Touch a little stronger if you have a commercially available protection sheet affixed.

• If you use a commercially available liquid crystal protection sheet, please follow the instructions that accompany the sheet. (Some liquid crystal protection sheets may impair visibility or operability.)

•Touch panel will not operate if the hand holding the unit is touching the touch panel.

•Do not press on the LCD monitor with hard pointed tips, such as ball point pens.

•Do not operate with your fingernails.

•Wipe the LCD monitor with a dry soft cloth when it gets dirty with finger prints or other.

•Do not scratch or press the LCD monitor too hard.

About the Stylus pen

It is easier to use the stylus pen (supplied) for detailed operation or if it is hard to operate with your fingers.

•Only use the supplied stylus pen.

•Do not place it where small children can reach.

VQT2S30 15