Panasonic Optical Image Stabilizer, Lens included in DMC-G2K has a stabilizer function

Preparation

∫Optical Image Stabilizer

The lens included in DMC-G2K has a stabilizer function.

•There is no [O.I.S.] switch on the 14–42 mm/F3.5–5.6 lens included in DMC-G2K. Set the [STABILIZER] settings in the [REC] Mode menu. (P129)

When using a lens with an [O.I.S.] switch, it is possible to set to enable the Optical Image Stabilizer by switching the [O.I.S.] switch on the lens to [ON].

•You can change the Optical Image Stabilizer Mode in the [REC] Mode menu. (P129) It is set to [MODE1] at the time of purchase.

•It is recommended to disable the Optical Image

Stabilizer when using a tripod. [ ] is displayed on the screen at that time.

Example when a lens with the [O.I.S.] switch is mounted.

Detaching a lens from the camera body

Attach the lens cap.

Press the lens release button D while turning the lens as far as possible in the direction of the arrow to detach it.

• Always attach the body cap to the camera body so that dirt or dust does not get inside.

• Attach the lens rear cap so that the lens contact point does not get scratched.

Note

•Change lenses where there is not a lot of dirt or dust. Refer to P186 when dirt or dust gets on the lens.

•When you turn the camera off or carry the camera, attach the lens cap to protect the surface of the lens.

•Be careful not to lose the lens cap, the lens rear cap and the body cap.

VQT2S30 21