Panasonic DMC-G2K operating instructions Troubleshooting, Battery and power source

Others

Troubleshooting

First, try out the following procedures (P192–200).

If the problem is not resolved, it may be improved by selecting [RESET] (P39) on the [SETUP] menu.

Battery and power source

The camera cannot be operated even when it is turned on.

•The battery is not inserted correctly. (P28)

•The battery is exhausted.

•Charge the battery.

•AC adaptor is not connected properly. (P181)

The LCD monitor turns off while the camera is turned on.

•Is the display set to viewfinder?

>Press [LVF/LCD] button to switch to LCD monitor display. (P42)

•Is [AUTO LCD OFF] (P36) of the [ECONOMY] Mode active?

>Press the shutter button halfway to cancel these modes.

•Is the LCD monitor switched off?

>Switch the display by pressing [DISPLAY]. (P63)

•The battery is exhausted.

•Charge the battery.

The camera turns off immediately after it is turned on.

•The battery is exhausted.

•Charge the battery.

•If you leave the camera on, the battery will be exhausted.

>Turn the camera off frequently by using the [ECONOMY] Mode etc. (P36)

This unit is turned off automatically.

•If you connect to a TV compatible with VIERA Link with a HDMI mini cable (optional) and turn off the power on the TV with the remote control for the TV, the power on this unit also turns off.

>If you are not using VIERA Link, set [VIERA Link] to [OFF]. (P38)

The [CHARGE] lamp flashes.

•Is the temperature of the battery excessively high or low? If it is, it will take longer than usual to charge the battery or charging may remain incomplete.

•Are the terminals of the charger or battery dirty?

>Wipe off the dirt using a dry cloth.

192 VQT2S30