Panasonic DMC-G2K Using the Remote Shutter optional, About Lock on the remote shutter

Others

Using the Remote Shutter (optional)

If you use the remote shutter (DMW-RSL1; optional), you can avoid jitter (camera shake) when using a tripod and you can keep the shutter pressed fully when taking pictures with

[B](Bulb) or Burst Mode. The remote shutter works similar to the shutter button on the camera.

Firmly connect the remote shutter to the [REMOTE] socket on the camera as far as it will go.

MIC

REMOTE

Take a picture.

1 Press the button lightly to press halfway.

2 Press the button fully to take the picture. (Press it as far as it will go.)

∫About [LOCK] on the remote shutter

•You can keep the shutter button pressed fully. This is effective when taking pictures with Burst Mode (P73) or

in [B] (Bulb) (P96).

• While pressing the shutter button fully, slide it to the [LOCK] side.

•Slide it to the other side to cancel [LOCK].

Note

•Do not use any other remote shutters except DMW-RSL1 (optional).

•You cannot operate the camera with the remote shutter in the following cases.

– When the Sleep Mode is canceled

•Record with Motion Picture P Mode (P115) when using for motion picture recording. Motion picture recording can be started/stopped with the remote shutter.

•The remote shutter cannot be used while the stereo microphone (DMW-MS1; optional) is in use.

VQT2S30 179