Sunbeam MX001 Using your Sunbeam Mixmaster continued, Small bowl selected, Large bowl selected

Using your Sunbeam Mixmaster (continued)

Note: Be sure both beaters or dough hooks click firmly in place, you may need to twist the attachments slightly to engage them in position prior to pushing them into place.

4.Depending on the amount of ingredients required for mixing, select bowl size by placing the turntable into either of the two holes on the base of the Mixmaster stand, see Figure 5.

Figure 6

Press locking button down and tilt mixer head forward

Figure 5 Figure 7

Small bowl selected

Large bowl selected

5.Press ‘head locking’ button to lower the head with the selected attachments (either, beaters or dough hooks) in place, into the mixing bowl. See Figures 6 & 7.

Using your Mixmaster

1.With the speed control dial in the OFF position, plug the power cord into a 230-240 volt power outlet.

2.Use the speed control dial to turn the Mixmaster ON and OFF and to control the mixing speeds.

Clearly marked instructions for correct mixing speeds for each type of mixture are shown in the ‘Mixing Guide’ on page 7.

Tip: Start mixing at slow speeds and increase speed gradually to prevent ingredients splashing out of the mixing bowl.

When adding dry ingredients, particularly flour, lower the speed temporarily until ingredients are combined.

Tip: When kneading yeast doughs, use speed 1 to achieve best results. For specific instructions for the use of dough hooks see 'Helpful Hints for a Successful Dough' on page 13.

5