Life Fitness X8 17mm Socket Wrench, Phillips Screwdriver Packaging, Assemble the Stabilizers

Tools Needed:

17mm Socket Wrench, Phillips Screwdriver

Step 1 Packaging

Parts: None

Remove all packaging and place main components to the side of the box. Break box down in each of the four corners.

NOTE: Use care when removing the foam blocks that support the pedal arms. Follow the unpacking instruction sheet attached to the foam blocks.

Step 2 Assemble the Stabilizers

Parts: Hardware Bag #1 (4, M10 x 15mm Silver Hex Head Bolts)

Tools: 17mm Socket Wrench

Assemble the stabilizer tubes (feet) (A) to the bottom base brackets (B) of the product using two M10 x 15mm Silver Hex Head Bolts (1) on each stabilizer tube. Both stabilizer tubes (feet) are identical.

11