C O M M E R C I A L P R O D U C T S D I V I S I O N
Diagram 9 Display console and keypad.
Numeric keypad can be used to access Club Custom Mode.
COURSE
CHANGE
| CE |
STAN | |
RESI |
|
1 | 4 |
| 7 |
2 | 3 | 5 | 6 |
Gently, press and hold the ▼ or ▲ key to view the available selections.
Important: To access Custom Club Mode, press RESET while the Precor banner is displayed. Within Z\x second, begin pressing the numeric key sequences. If the system does not detect a key press (within Z\x second after RESET), it returns to the banner. Once you begin entering a key sequence, each key must be pressed within four seconds of the other or the Precor banner reappears and you have to begin again.
To change the units of measure, set the maximum workout and pause times, or customize a course, press the following keys:
RESET, 5, 6, 5, 1, 5, 6, 5
You can also use the standard keypad keys to access the Club Custom Mode. As shown in Diagram 9, numbers are associated with the keypad keys.To create the same sequence shown above, you would press:
RESET, RESISTANCE ▼, RESISTANCE ▲▼, RESET, RESISTANCE ▼▲▼
Note: Do not use the COURSE CHANGE ▼▲ keys to attempt access to the Club Custom Mode.
page 16