C O M M E R C I A L P R O D U C T S D I V I S I O N
At the user ID prompt, five zeros appear on the display. The blinking left zero indicates that it is awaiting input.The following table provides information about the keypad functions:
User ID Entry: | Program Keys |
|
|
▼or ▲
Numeric keypad
ENTER
RESET
moves the blinking LED from field to field.
use the number keys to enter a user ID. The number that is pressed appears in the display and the next field begins to blink. When all five user ID numbers are selected, the user must press ENTER to submit it.
submits the displayed user ID. Note that if the five zeros are being displayed when the user presses ENTER, the user ID entry is bypassed and the course prompt appears.
resets the display to the Precor banner.
A message indicates when the user ID is accepted by the CSAFE master device. Then, the course prompt is displayed. See Quick Steps to Working Out on page 31.
Note: If the user’s pedal speed drops below 20 revolutions per minute while using the CSAFE device connection, a prompt PEDAL FASTER appears. If the pedal speed remains below the 20 revolutions per minute threshold for the next twenty seconds, the CSAFE connection is terminated. The word RESETTING appears on the display while the C846 disconnects from the CSAFE device.
To review information about CSAFE specifications, visit the web site at:
www.fitlinxx.com/csafe
If you have questions or need technical support, refer to Obtaining Service on page 7.
page 21