Viewing the Error Log
The error log displays information about errors that may have occurred while using the EFX. Up to ten errors are recorded along with the odometer and hour meter values at the time the error occurred.
1.At the Precor banner, press and hold the RESET key for at least four seconds to view the error log. The most recent error recorded appears on the lower display. Refer to Diagram 8.
Note: If there are no errors in the log, NO ERRORS appears on the display.
Most recent error | The hour meter at the time | |
the error was detected | ||
|
1‐Error 40 AT 1234567 STRIDES 1714 HOURS
Error code |
| Odometer reading at the |
| time the error occurred | |
|
|
Diagram 9: Error log
2.Use the arrow keys to cycle through the error log.
3.Copy the error code information to paper so you can provide it to Customer Support if needed. Be sure to copy it exactly as shown.
4.When you no longer need the information in the error log, press QUICKSTART for at least four seconds to erase it. NO ERRORS appears on the display and remains static to let you know when the error log has been cleared.
Important: You cannot retrieve the error log once you have cleared it. You may want to resolve any issues you are experiencing with the EFX before clearing the error log.
5.When you are ready, press RESET to return to the Precor banner.
Troubleshooting Error Codes
If any error codes appear in the display, turn the unit Off and On. If the error continues to occur, call an authorized service person for assistance. Refer to Radio Frequency Interference (RFI).
Owner’s Manual: Advanced Programming and Troubleshooting | 34 |