JVC RX-7042S, RX-7040B manual Vcr

English

Video component connections

Use the cables with RCA pin plugs (not supplied).

Connect the white plug to the audio left jack, the red plug to the audio right jack, and the yellow plug to the video jack.

•If your video components have S-video (Y/C-separation) and/or component video (Y, PB, PR) terminals, connect them using an S- video cable (not supplied) and/or component video cable (not supplied). By using these jacks, you can get better picture quality in the order:

Component video > S-video > Composite video

•If your video components have digital audio output terminal, connect them using the digital cords explained in “Digital connections” (see page 12). By using this terminal, you can get better sound quality.

If your video components have an AV COMPULINK jack

See also page 38 for detailed information about the connection and the AV COMPU LINK remote control system.

IMPORTANT:

This receiver is equipped with the following video jacks—composite video, S-video and component video jacks. You can use any of the three to connect a video component.

However, the video signals from one type of these input jacks are transmitted only through the video output jacks of the same type.

Therefore, if a recording video component and a playing video component are connected to the receiver through the video jacks of different type, you cannot record the picture. In addition, if the TV and a playing video component are connected to the receiver through the video jacks of different type, you cannot view the playback picture on the TV.

TV and/or DBS tuner

	MONITOR
	OUT
	Y	PB	PR
	R	TV SOUND
A		DBS
	L	IN
	TV
	When connecting	MONITOR
	the TV to the	OUT
	AUDIO jacks (TV
	SOUND/DBS IN),
	DO NOT connect
	the TV’s video
B	output to these
	video input jacks.

C

D

Connect the TV to appropriate MONITOR OUT jacks to view the playback picture from any other connected video components.

ÅTo audio output

ıTo component video input Ç To S-video input

Î To composite video input

VCR

ÅTo audio input ıTo audio output ÇTo S-video output

ÎTo composite video output ‰To S-video input

ÏTo composite video input ÌTo component video output

		DBS(VCR)
		IN
A	R	TV SOUND
		DBS
	L	IN

A B

VCR

DBS(VCR)

IN

R	OUT
	(REC)
L	VCR
R	IN
	(PLAY)
L
Notes:

C D E F G

	DBS
	DBS tuner
B	D
C

ÅTo audio output

ıTo component video output Ç To S-video output

Î To composite video output

Notes:

• When connecting a DBS tuner to the TV SOUND/DBS IN jacks,

change the source name to “DBS,” which will be shown on the

display when it is selected as the source. Otherwise you cannot

view any picture from DBS tuner. See page 17 for details.

• When connecting a DBS tuner to component video input jacks,

make the component video input setting (VIDEO IN DBS) correctly

for AV COMPU LINK. See page 26 for details.

•When connecting a VCR to component video input jacks, make the component video input setting (VIDEO IN VCR) correctly for AV COMPU LINK. See page 26 for details.

•When make the component video input setting for a VCR (VIDEO IN VCR) correctly, the component video input setting for a DBS tuner (VIDEO IN DBS) is not available.

• When make the component video input setting for a DBS tuner

(VIDEO IN DBS) correctly, the component video input setting for a

VCR (VIDEO IN VCR) is not available.

10