JVC RX-7040B, RX-7042S manual Activating the DSP Modes

All channel stereo mode		Activating the DSP Modes
This mode can reproduce a larger stereo sound field using all the
connected (and activated) speakers.	Activating one of the DSP modes for a source automatically
• If the surround speakers are set to “NONE,” you cannot select	recalls the memorized settings and adjustments (see pages 21 to
“ALL STEREO.”
	29).
		You can also use the buttons on the remote control for the same
		functions.

English

1.	Select and play any source excluding DVD
	MULTI.
2.	Press DSP repeatedly until the DSP mode you
	want appears on the display.
Sound reproduced from normal stereo
	• Each time you press the button, the DSP modes change as
	follows:

	DIGITAL AUTO
L C	R LINEAR PCM
SUBWFR	DIGITAL
LS	RS

DSP SPEAKERS 1

VOLUME

Sound reproduced from All Channel Stereo mode

Mono Film

In order to reproduce a more acoustic sound field in your listening room while viewing monaural sound video software (analog, 2- channel digital, and Dual Mono signals), you can use this mode. The surround effect will be added, and the sound localization of actor’s words will be improved. This mode cannot be used for

multi-channel digital signals.

When “MONO FILM” is used, the sounds come out of all the connected and activated speakers.

•If surround speakers are set to “NONE” in the speaker setting, JVC’s original 3D-PHONIC processing (which has been developed to create the surround effect through the front speakers only) is used. The 3D-PHONIC indicator lights up on the display.

•If incoming signals change from 2-channel digital signal to another digital signal type, “MONO FILM” is canceled and an appropriate Surround mode is activated.

= HALL 1	= HALL 2	= LIVE CLUB
= DANCE CLUB = PAVILION		= ALL STEREO*1
= THEATER 1	= THEATER 2	= MONO FILM*2

=(Back to the beginning)

*1	When the surround speakers are set to “NONE,” you cannot
	select “ALL STEREO.”
*2	When multi-channel signals come in, you cannot select
	“MONO FILM.”

Note:

When the surround speakers are set to “NONE,” the 3D-PHONIC processing is applied to the DSP modes (the 3D-PHONIC indicator also lights up).

To adjust the effect level (except All Channel Stereo), see page

29.

To cancel the DSP modes

Press SURROUND/DSP OFF (or SURR/DSP OFF on the remote control) repeatedly until “SURR OFF” appears on the display.

35