Operating Other Manufacturers’ Video Equipment

English

Operating Other Manufacturers’ Video Equipment

This remote control supplied with the receiver can transmit control signals for other manufacturers’ TVs, CATV converters, DBS tuners, VCRs and DVD players.

When operating the other manufacturers’ components, refer also to the manuals supplied with them.

•After replacing batteries for the remote control, you need to set the manufactures’ codes again.

To change the transmittable signals for operating another manufacturer’s TV

1.Press and hold TV .

2.Press TV/DBS.

3.Enter a manufacturer’s code using buttons 1 – 9,

and 0.

See the list on page 44 to find the code.

4.Release TV .

5.Try to operate your TV by pressing TV .

When your TV turns on or off, you have entered the correct code.

If there are more than one code listed for your brand of TV,

try each one until the correct one is entered.

The following buttons can be used for operating the TV:

TV : Turn on and off the TV.

TV VOL +/–:Adjust the volume.

TV/VIDEO: Set the input mode (either TV or VIDEO).

After pressing TV/DBS, you can perform the following operations on the TV:

CHANNEL +/–:Change the channels.

1 – 9,10 (RETURN), 0, 100+ (+10):

Select the channels.

The 10 (RETURN) button will function as the

ENTER button if your TV requires pressing

ENTER after selecting a channel number.

Notes:

•All the functions listed above may not be assigned to the buttons for some TVs.

•If you cannot change the channels of some TVs by pressing 10 keys, press CHANNEL +/– for changing the channels.

To change the transmittable signals for operating a CATV converter or DBS tuner

1.Press and hold CATV/DBS .

2.Press CATV/DBS CONT.

3 Enter a manufacturer’s code using buttons 1 – 9, and 0.

See the list on page 44 to find the code.

4.Release CATV/DBS .

5.Try to operate your CATV converter or DBS

tuner by pressing CATV/DBS .

When your CATV converter or DBS tuner turns on or off, you have entered the correct code.

If there are more than one code listed for your brand of

CATV converter or DBS tuner, try each one until the correct one is entered.

The following button can be used for operating the CATV converter and DBS tuner:

CATV/DBS : Turn on and off the CATV converter or DBS tuner.

After pressing CATV/DBS CONT, you can perform the following operations on the CATV converter or DBS tuner:

CHANNEL +/–:Change the channels.

1 – 9,10 (RETURN), 0, 100+ (+10):

Select the channels.

The 10 (RETURN) button will function as the ENTER button if your equipment requires pressing ENTER after selecting a channel number.

Note:

You cannot preset the signals for both the CATV converter and DBS

tuner at the same time.