English
To tune in to a preset station
On the front panel:
1. Press FM or AM to select the band.
The last received station of the selected band is tuned in.
Selecting the FM Reception Mode
When an FM stereo broadcast is hard to receive or noisy, you can change the FM reception mode while receiving an FM broadcast.
•You can store the FM reception mode for each preset station (see page 19).
2.Press FM/AM PRESET 5 or ∞ until you find the channel you want.
•Pressing FM/AM PRESET 5 increases the number.
•Pressing FM/AM PRESET ∞ decreases the number.
On the remote control:
DIMMER |
|
| AUDIO |
DVD | CATV/DBS | VCR | TV |
DVD MULTI | DVD | CD | TAPE/CDR |
TV/DBS | VCR | FM/AM | MUTING |
TV VOL | CHANNEL | VOLUME | |
1 2 3
4 5 6
7/P 8 9
10 | 0 | 10 |
1. Press FM/AM to select the band.
The last received station of the selected band is tuned in.
•Each time you press the button, the band alternates between FM and AM.
2.Press the 10 keys to select a preset channel number.
•For channel number 5, press 5.
•For channel number 15, press +10 then 5.
•For channel number 20, press +10 then 10.
•For channel number 30, press +10, +10, then 10.
Note:
When you use the 10 keys on the remote control, be sure that they are activated for the tuner, not for the DVD and others. (See page 41.)
While listening to an FM station, press FM MODE.
•Each time you press the button, the FM reception mode alternates between “AUTOMUTING” and “MODE MONO.”
| ANALOG | TUNED STEREO AUTO MUTING |
L | R | LINEAR PCM |
SPEAKERS 1
VOLUME
| ANALOG | TUNED |
L | R | LINEAR PCM |
SPEAKERS 1
VOLUME
AUTOMUTING Normally select this.
When a program is broadcasted in stereo, you will hear stereo sound; when in monaural, you will hear monaural sounds. This mode is also useful to suppress static noise between stations.
The AUTO MUTING indicator lights up on the display. (Initial setting)
MODE MONO Select this to improve the reception (but stereo effect will be lost).
In this mode, you will hear noise while tuning in to the stations.
The AUTO MUTING indicator (and the STEREO indicator) goes off from the display.
Note:
When you use the FM MODE on the remote control, be sure that it is activated for the tuner, not for the DVD and others. (See page 41.)
20