JVC RX-7040B, RX-7042S manual Audio, Video, FM tuner IHF, AM tuner, General

Page 48
Amplifier
Output Power
At Stereo Operation Front Channel:
At Surround Operation
Front Channel:
Center Channel:
Specifications

130 W per channel, min. RMS, driven into 8 Ω, 20 Hz to 20 kHz, with no more than 0.08% total harmonic distortion.

130 W per channel, min. RMS, driven into 8

Ωat 1 kHz, with no more than 0.8% total harmonic distortion.

130 W, min. RMS, driven into 8 Ω at 1 kHz, with no more than 0.8% total harmonic distortion.

Surround Channel: 130 W per channel, min. RMS, driven into 8

Ωat 1 kHz, with no more than 0.8% total harmonic distortion.

Surround Back Channel:

130 W, min. RMS, driven into 8 Ω at 1 kHz, with no more than 0.8% total harmonic distortion.

Audio

 

 

Audio Input Sensitivity/Impedance (1 kHz)

 

DVD IN, VCR IN, TV SOUND/DBS IN:

200 mV/47 kΩ

CD IN, TAPE/CDR IN:

200 mV/47 kΩ

Audio Input (DIGITAL IN)*

 

Coaxial

DIGITAL 1 (DVD):

0.5 V(p-p)/75 Ω

Optical

DIGITAL 2 (CD), DIGITAL 3 (TV), DIGITAL 4 (CDR):

 

–21 dBm to –15 dBm (660 nm ±30 nm)

*Corresponding to Linear PCM, Dolby Digital, and DTS (with sampling frequency—32 kHz, 44.1 kHz, 48 kHz).

Audio Output Level

SUBWOOFER OUT:

1 V

Recording Output Level

VCR OUT, TAPE/CDR OUT: 200 mV

Digital Output

Optical

 

DIGITAL OUT

 

 

 

 

Signal wave length:

660 nm

 

 

 

Output level: –21 dBm to –15 dBm

Signal-to-Noise Ratio (’66 IHF/’78 IHF)

 

DVD IN, VCR IN, TV SOUND/DBS IN:

87 dB/80 dB

CD IN, TAPE/CDR IN:

 

87 dB/80 dB

Frequency Response (8 Ω)

 

 

 

DVD IN, VCR IN, TV SOUND/DBS IN:

 

 

 

 

20 Hz to 100 kHz (+1 dB, –3 dB)

CD IN, TAPE/CDR IN:

20 Hz to 100 kHz (+1 dB, –3 dB)

Bass Boost:

 

 

+6 dB ±1.0 dB at 100 Hz

Equalization

 

 

 

 

63 Hz, 250 Hz, 1 kHz, 4 kHz, 16 kHz: ±8 dB (in 2 dB steps)

Video

 

 

 

 

Video Input Sensitivity/Impedance

 

 

Composite Video

DVD IN, VCR IN, TV SOUND/DBS IN:

 

 

 

 

1 V(p-p)/75 Ω

S-video

DVD IN, VCR IN, TV SOUND/DBS IN

 

(Y: luminance):

 

1 V(p-p)/75 Ω

 

(C: chrominance, burst):

0.286 V(p-p)/75 Ω

Component Video DVD IN, DBS (VCR) IN

 

(Y: luminance):

 

1 V(p-p)/75 Ω

 

(PB/PR):

 

0.7 V(p-p)/75 Ω

Video Output Level

 

 

 

 

Composite Video

VCR OUT, MONITOR OUT: 1 V(p-p)/75 Ω

S-video

VCR OUT, MONITOR OUT

 

(Y: luminance):

 

1 V(p-p)/75 Ω

 

(C: chrominance, burst):

0.286 V(p-p)/75 Ω

Component Video MONITOR OUT

 

1 V(p-p)/75 Ω

 

(Y: luminance):

 

 

(PB/PR):

 

0.7 V(p-p)/75 Ω

Synchronization:

 

 

 

Negative

Signal-to-Noise Ratio:

 

 

45 dB

FM tuner (IHF)

 

 

 

 

Tuning Range:

 

 

87.5 MHz to 108.0 MHz

Usable Sensitivity

 

Monaural:

12.8 dBf (1.2 µV/75 Ω)

50 dB Quieting Sensitivity

Monaural:

16.0 dBf (1.7 µV/75 Ω)

 

 

Stereo:

37.5 dBf (20.5 µV/75 Ω)

Stereo Separation at OUT (REC):

 

35 dB at 1 kHz

AM tuner

 

 

 

 

Tuning Range:

 

 

 

530 kHz to 1 710 kHz

General

 

 

 

 

Power Requirements:

 

 

 

AC 120V , 60 Hz

Power Consumption:

 

320 W/440 VA (at operation)

 

 

 

2 W (in standby mode)

Dimensions (W x H x D):

435 mm x 157 mm x 425 mm

 

 

(17 3/16 in. x 6 3/16 in. x 16 3/4 in.)

Mass:

 

 

 

12.1 kg (26.7 lbs)

Designs & specifications are subject to change without notice.

46

Page 47 Page 49
Image 48
Page 47 Page 49
Contents RX-7040B/RX-7042S Mises en garde, précautions et indications diverses Table of Contents Features Precautions IntroductionRemote Control Parts IdentificationHow to open the front door Front PanelPress down on PUSH-OPEN Display Window Rear PanelPutting Batteries in the Remote Control Getting StartedReplace the cover FM antenna connectionsConnecting the Speakers and Subwoofer Connecting the subwooferSpeaker connections Placing speakers Front speakers L/R and center speaker CSurround speakers LS/RS and surround back speakers SB SubwooferConnecting Audio/Video Components Analog connectionsAudio component connections If your audio components have a Compu Link jackVideo component connections If your video components have an AV Compulink jackE F G When you connect a DVD player with stereo output jacks DVD playerConnecting the Power Cord Plug the power cord into an AC outletDigital connections Daily Operational Procedure Selecting the Source to Play Turning On the PowerBasic Operations Adjusting the Volume Speaker and signal indicators on the displayWhen analog input is selected Always lights up Selecting different sources for picture and soundSelecting the Analog or Digital Input Mode Ex. When both sets of the speakers selectedListening with headphones only To use the speakers connected to the Front SpeakersSetting the Dynamic Range To select the analog input mode againTurning Analog Direct On and Off Making Sounds NaturalUsing the Sleep Timer Reinforcing the BassMuting the Sound Changing the Display BrightnessTuning in to Stations Manually Using Preset TuningReceiving Radio Broadcasts Selecting the FM Reception Mode Press the 10 keys to select a preset channel numberWhile listening to an FM station, press FM Mode To tune in to a preset stationBasic Settings Press Quick Speaker SetupPress in Multi JOG Push SET Channel numberSpeakers channels number and the size Room size and the speaker distanceSize Speaker Distance Press Setting Setting the speakersPush in Multi JOG Push SET Press ExitSetting the speaker distance Setting the bass soundsSetting for easy and effective surround operations Setting the digital input terminalsSelect Auto Surr on when activating Auto Surround Selecting the main or sub channelSetting the component video input Memorizing the volume level for each sourceTo recall the volume level To cancel the One Touch OperationAdjusting Sound Basic Adjustment Items Basic ProcedurePress Adjust Ex. When adjusting the subwoofer level toAdjusting the equalization patterns Adjusting the speaker output levelsRepeat steps 1 and 2 to adjust the other frequency Adjustable speakersAdjust the speaker output level For DAP modes and Mono FilmFor Pro Logic II Music only For Neo6 Music onlyUsing the Surround Modes Reproducing Theater Ambience Introducing the Surround ModesWhat is Dual Mono? DTS Digital SurroundDTS Extended Surround DTS-ES DTS 96/24Surround Modes Applicable to the Various Software 3D Headphone mode-3D H PhoneVirtual 6.1-channel surround Press Surround to activate the Surround mode Activating the Surround ModesSelect and play any source other than DVD Multi Using the DSP Modes 3D Headphone modeReproducing the Sound Field Introducing the DSP ModesTo cancel the DSP modes Activating the DSP ModesSelect and play any source excluding DVD Want appears on the displayUsing the DVD Multi Playback Mode Activating the DVD Multi Playback ModePress DVD Multi so that DVD appears on the display Compu Link Remote Control System Remote Control through the Remote Sensor on the ReceiverPress the play 3 button on the CD player Automatic Source SelectionAV Compu Link Remote Control System Connections 1 AV Compu Link connectionConnections 2 Video cable connection Connecting procedure Automatic Selection of TV’s Input ModeAutomatic Power On/Off Standby One-Touch Video PlayOperating JVC’s Audio/Video Components Sound control section AmplifierTuner CD playerOperating Video Components CD recorderCassette deck DVD playerIf there are more than one code listed for your brand of TV Release TV Try to operate your TV by pressing TVIf there are more than one code listed for your brand Release VCR Try to operate your VCR by pressing VCRRelease DVD Try to operate your DVD player by pressing For TV Manufacturer Codes For Catv converter Manufacturer CodesManufacturer Codes For VCRTroubleshooting Problem Possible Cause SolutionAudio VideoFM tuner IHF AM tunerLimited WARRANTYAUDIO-2 Authorized Service Centers RX-7040B/RX-7042S AUDIO/VIDEO Control Receiver Recepteur DE Commande AUDIO/VIDEO Mises en garde, précautions et indications diverses English CC Compression Compensative converter Parts Identification Quick Speaker Setup Exit Push Open Push SET Phones 3 4 6789 0 = ~ ! @ Getting Started Connecting the Speakers and Subwoofer Placing speakers Connecting Audio/Video Components VCR DVD player Connecting the Power Cord Basic Operations LS S RS Selecting the Front Speakers Attenuating the Input Signal Changing the Source Name Using the Sleep Timer Receiving Radio Broadcasts Selecting the FM Reception Mode Basic Settings Basic Setting Items Basic Procedure Size of the small speaker connected Selecting the main or sub channel Setting the component video input Adjusting Sound Adjusting the equalization patterns Effect Using the Surround Modes DTS*2 Surround Modes Applicable to the Various Software Activating the Surround Modes Using the DSP Modes Activating the DSP Modes Using the DVD Multi Playback Mode Compu Link Remote Control System AV Compu Link Remote Control System Connecting procedure Operating Audio Components Operating Video Components Operating Other Manufacturers’ Video Equipment Release VCR Try to operate your VCR by pressing VCR 02, 17 Troubleshooting 200 mV/47 kΩ EN, FR Victor Company of JAPAN, Limited 0204MWMMDWJEIN
Top Page Image Contents