JVC RX-888VBK manual Press DVD Multi so that DVD, Multi appears on the display

From the remote control:

1. Press DVD MULTI so that “DVD	DVD MUILTI
MULTI” appears on the display.

Note:

When you select “DVD MULTI” as the source to play, the DSP mode is canceled temporarily, and the SURROUND ON/OFF and SURROUND MODE buttons do not work.

2.Select the analog discrete output mode on the DVD player, and start playing a DVD.

• Refer to the manual supplied with the DVD player.

If you need to make any adjustment, go to the following steps.

3. Press SOUND.		SOUND
The 10 keys are activated for adjusting the sound.
4. Adjust the speaker output levels.		CNTR
• To adjust the center speaker level, press	2	3
CNTR –/+ (from –10 dB to +10 dB).		MENU
• To adjust the left rear speaker level, press
REAR•L –/+ (from –10 dB to +10 dB).
• To adjust the right rear speaker level, press		REAR•L
REAR•R –/+ (from –10 dB to +10 dB).	5	6
		ENTER

REAR•R

8 9

5. Press CNTR TONE to select the	CNTR TONE
center tone level you want.	1

•Each time you press the button, the display changes to show the following:

SOFT 2 SOFT 1FLAT SHARP 1SHARP 2

––––––––––––––– MEMO ––––––

Use this column to write down your DVD MULTI playback mode adjustments for your future reference.