JVC RX-888VBK manual Press Text Display while CD is selected as the source, Press SET again

Searching for a Disc (Only for the CD player)

Search for a disc by its performer:

1. Press TEXT DISPLAY while “CD” is selected as the source.

The Disc Information screen appears on the TV.

2.Press %/ Þto move

to “SEARCH,” then

press SET.

The DISC SEARCH screen appears .

3. Press %/ Þto move

to “PERFORMER”,

then press SET.

The PERFORMER SEARCH

screen appears.

4.Press %/ Þ/ @/ #to move in front of the first character of the performer you want to search, then press SET.

To correct the incorrect entry, press %/ Þ/ @/ #to move

in front of the correct character, then press SET.

Note:

Symbols such as @, # or $ cannot be available for search.

5. Press SET again.

Disc search starts, then the

SEARCH RESULT screen,

showing the performers, appears.

6.On the SEARCH RESULT screen, you can do the following:

•Changing the indication of the disc information: Press % /

Þ to move to a searched disc, then press @/ #. Each time you press @ / #, the disc information alternates between its performer and its disc title.

•Starting a disc play and going to the Disc Information

screen (see page 38): Press % / Þ to move to a searched disc, then press SET.

•Showing unseen disc information (if more than 5 discs are listed as a result of the search): Press %/ Þ until they appear.

•Going back to the PERFORMER SEARCH screen: Press EXIT.

Search for a disc by its disc title:

1. Press TEXT DISPLAY while “CD” is selected as the source.

The Disc Information screen appears on the TV.

2. Press %/ Þto move to “SEARCH,” then

press SET.

The DISC SEARCH screen appears.

3. Press %/ Þto move to “DISC TITLE,

then press SET.

The DISC TITLE SEARCH

screen appears.

4.Press %/ Þ/ @/ #to move in front of the first character of the disc title you want to search, then press SET.

To correct the incorrect entry, press %/ Þ/ @/ #to move

in front of the correct character, then press SET.

Note:

Symbols such as @, # or $ cannot be available for search.

5. Press SET again.

Disc search starts, then the

SEARCH RESULT screen,

showing the disc titles, appears.

6.On the SEARCH RESULT screen, you can do the following:

•Changing the indication of the disc information: Press %/

Þ to move to a searched disc, then press @/ #. Each time you press @ / #, the disc information alternates between its disc title and its performer.

•Starting a disc play and going to the Disc Information

screen (see page 38): Press %/ Þ to move to a searched disc, then press SET.

•Showing unseen disc information (if more than 5 discs are listed as a result of the search): Press %/ Þuntil they appear.

•Going back to the DISC TITLE SEARCH screen: Press EXIT.