JVC RX-888VBK manual Press %/ Þ/ @/ #to adjust the SEA mode as you want, To Tuner

Page 36

4. Press %/ Þto move to “SEA ADJUST.”

The SEA ADJUST menu appears.

5.Press %/ Þ/ @/ #to adjust the SEA mode as you want.

SEA ADJUST

SEA USERMODE

100 1k 10kHz

SET:MEMORY

“LFE ATT.”:

Set the low frequency effect attenuator

 

level (see page 15).

“COMP.”:

Set the dynamic range compression

 

(see page 15).

“DIGITAL 1/2/3”:

Set the digital input terminal

 

(see page 13).

“FL DISP.”:

Shows the disc text information on the

 

display (see page 13).

@/ # : Select the frequency ranges.

%/ Þ: Adjust the frequency levels.

6.Press SET to store the setting into the SEA USERMODE.

•If you press EXIT, without pressing SET in this step, you can return to the SEA menu. (The adjustment you have made is active but not stored.)

7.When you finish, press EXIT repeatedly until the menu disappears from the TV.

Setting the Basic Setting Items (Also see

pages 12 – 15)

Notes:

*Not adjustable when “CENTER SPK” is set to “NONE” (see page 14).

**Not adjustable when “REAR SPK” is set to “NONE” (see page 14).

4.When you finish, press EXIT repeatedly until the menu disappears from the TV.

Operating the Tuner (Also see pages 17 and 18)

1. Press MENU.

The MAIN MENU appears on the TV.

• Pressing one of the % / Þ / @/ #buttons also displays the

1. Press MENU.

The MAIN MENU appears on the TV.

• Pressing one of the %/ Þ / @/ #buttons also displays the

MAIN MENU.

2. Press %/ Þto move

to “TUNER

TUNER CONTROL

MAIN MENU.

2.Press %/ Þto move to “SETTING,” then

press @/ #.

SETTING 1

 

SUBWOOFER : NO

FRONT

SPK : LARGE

CENTER

SPK : SMALL

REAR

SPK : LARGE

CONTROL,” then

press @/ #.

The TUNER CONTROL menu appears.

PRESET CH : 1

BAND :FM FREQUENCY : 87.5 MHz

FM MODE :AUTO

PRESET MEMORY

:OPERATE

The SETTING 1 or SETTING 2 menu appears.

CNTR

DELAY

: 3msec

REAR

DELAY

: 5msec

CROSSOVER

:100Hz

 

NEXT

PAGE

3. Press %/ Þto move to the item you want to set or adjust, then press @/ #.

3.Press %/ Þto move to the item you want to set or adjust, then press

@/ #.

•To go to the SETTING 2

menu, move to “NEXT PAGE,” then press @/ #.

•To go back to the SETTING

1 menu, move to “PREVIOUS PAGE,” then press @/ #.

:ENTER

SETTING 2

LFE ATT. : 0dB

COMP. : OFF

DIGITAL 1 : DBS

DIGITAL 2 : CD

DIGITAL 3 : MD

FL DISP. : NORMAL

PREVIOUSPAGE

:ENTER

On the TUNER CONTROL menu, you can do the following:

“PRESET CH”:

Select a preset channel station.

“BAND”:

Select the band.

“FREQUENCY”:

Tune in a station manually.

“FM MODE”:

Select the FM reception mode.*

“PRESET MEMORY”: See “Storing the Preset Stations” on the next page.

Note:

* Not displayed when an AM station is selected.

4. When you finish, press EXIT repeatedly until the

On the SETTING 1 and 2 menus, you can do the following:

“SUBWOOFER”:

Set the subwoofer information (see

 

page 12).

“FRONT SPK”:

Set the front speaker information (see

 

page 14).

“CENTER SPK”:

Set the center speaker information (see

 

page 14).

“REAR SPK”:

Set the rear speaker information (see

 

page 14).

“CNTR DELAY”:

Adjust the delay time of the center

 

speaker output (see page 14). *

“REAR DELAY”:

Adjust the delay time of the rear

 

speaker output (see page 14). **

“CROSSOVER”:

Set the crossover frequency

 

(see page 15).

menu disappears from the TV.

Page 35 Page 37
Image 36
Page 35 Page 37
Contents RX-888VBK For U.S.A Parts Identification Using the DSP Modes Getting Started Using the DVD Multi Playback ModeBasic Settings Using the On-Screen MenusFront Panel Remote Control Before Installation Checking the Supplied AccessoriesConnecting the FM and AM Antennas Connecting the Speakers Basic connecting procedureConnecting the front speakers AM Antenna ConnectionsConnecting Audio/Video Components Connecting the rear and center speakersConnecting the subwoofer speaker Analog connectionsIf your audio components have a Compu LINK-3 or Text Compu Link terminalVideo component connections VHS VCRDVD player To S-video outputTo composite ‚ To composite video outputConnecting the Power Cord Putting Batteries in the Remote ControlOn the back of the remote control, remove the battery cover + to + Replace the coverTurning the Power On and Off Standby From the remote controlSelecting the Source to Play On the front panelAdjusting the Volume Selecting the Front SpeakersEtc Turn Source Selector toAttenuating the Input Signal Listening at Low Volume LoudnessAdjusting the Subwoofer Output Level Muting the SoundAdjusting the Front Speaker Output Balance Setting the Subwoofer InformationChanging the Source Name Recording a SourceDigital Input Digital in Terminal Setting Selecting the Analog or Digital Input ModeShowing the Text Information on Display Setting the Speakers for the DSP Modes Center Delay Time SettingFront, Center, and Rear Speaker Setting Rear Delay Time SettingCrossover Frequency Setting Low Frequency Effect Attenuator SettingDynamic Range Compression Setting Frequency appears on the displayStoring the Basic Settings Adjustments One Touch Operation Adjust the sound using the functions listed aboveUsing the Sleep Timer Press ONE Touch OPERATION. OnetouchoperationUsing Preset Tuning Tuning in Stations ManuallyAssigning Names to Preset Stations Selecting the FM Reception ModeSelecting Your Favorite SEA Mode Creating Your Own SEA Mode3D-PHONIC modes DAP modesWith 3D Theater selected DVD Multi Playback Mode Surround modesDolby Surround Dolby Digital and Dolby Pro Logic DTS Digital SurroundAvailable DSP Modes According to the Speaker Arrangement FrontAdjusting the 3D-PHONIC Modes Adjusting the DAP ModesAdjusting the Surround Modes ON/OFF to activate an Appropriate Surround mode Adjust the center tonePress DOLBY/DTS Surround Or DTS SurroundJVC Theater Surround adjustments Repeatedly until Theater orDIG Theater appears on Display Center tone level you want Press SoundActivating the DSP Modes Mode you want appears on Display Repeatedly until the DSP mode youTo cancel the DSP mode Want appears on the displayActivating the DVD Multi Playback Mode DVD Multi appears on DisplayCntr be applied to the center speaker only Refer to the manual supplied with the DVD player10 keys are activated for adjusting the sound Press DVD Multi so that DVDMulti appears on the display Center tone level you want When you finish, press Exit To Mode DSP mode you want to Press MenuPress @/ #to adjust the subwoofer output level Input Attenuator modePress %/ Þto move to Sound To Input ATTTo SEA Mode Activating the DVD Multi Playback ModeSelecting Your Favorite SEA Mode Creating Your Own SEA ModePress %/ Þ/ @/ #to adjust the SEA mode as you want Press SET to store the setting into the SEA UsermodePress %/ Þto move to SETTING, then Press @/ # Setting the Basic Setting Items Also seeTo Preset Selected characterEnter up to four Press %/ Þ / @/ #toRemote Control through the Remote Sensor on the Receiver Same timeCD player Cassette deck MD recorder Automatic Source SelectionThen turn on this receiver Displaying the Disc Information on the TV screenDisc Search Only for CD Player Disc Title InputPress Text Display while CD or MD is selected as the source Showing the Disc Information on the TV ScreenTo exit from the Disc information screen Disc Information screen appears on the TVPress Text Display while CD is selected as the source Press %/ Þto move To SEARCH, then Press SETPress %/ Þto move To Performer Then press SET Press SET againPress %/ Þto move to Search Then press SET Press %/ Þto move To GENRE, then Press SETPress %/ Þto move To Title INPUT, then press SET Entering the Disc InformationPress Text Display while MD is selected as the source Press %/ Þto move To Title Input Then press SETEnter the disc title Referring to steps 3 Press %/ Þto move to the genre you want, then press SETIf the AV Compu Link terminal On the TV is RECEIVER/AMPIf the AV Compu Link terminal on the TV is AV Compu Link EX CASE1 If the components are equipped with the S-videoAutomatic Selection of TV’s Input Mode Automatic Power On/OffOne-Touch Video Play One-Touch DVD PlaySound control section Amplifier CD playerCD player-changer TunerTurntable Cassette deckMD recorder VCR 1 VCR connected to the VCR 1 jacksRelease TV/CATV/DBS Power TV/CATV/DBS PowerIf there are more than one code listed for your brand of TV Try to operate your TV by pressing TV/CATVRelease VCR 1 Power Try to operate your VCR by pressing VCR 1 PowerIf there are more than one code listed for your brand AOC CXCJBL JCBPhaStar 772 Chostar 775 Xpressvu Tachi 819 Errold 627 775 Anasonic 701 Rimestar 566 Ony 639ABC CCE HI-QKLH STS TMKProblem Possible Cause Solution Amplifier AudioVideo Tuning Range Usable Sensitivity Signal-to-Noise Ratio FM tuner IHFAM tuner General781 954 650 Valley Road Wayne, NJ1098 Limited Warranty AUDIO-2 0299HIMMDWJEM
Top Page Image Contents