Diagram 8 |
|
|
|
|
Attach resistance cylinder to |
|
|
|
|
upright support. |
|
|
|
|
Upper axle |
|
|
|
|
Spacer |
|
|
|
|
Washer |
|
|
|
|
Bolt |
|
|
|
|
Upright support |
|
|
|
|
Adjustment portion |
|
|
|
|
5 | 4 | 3 | 2 | 1 |
| ||||
|
| |||
Resistance cylinder |
|
|
|
|
Indicator arrow |
|
|
|
|
5.Attach Resistance Cylinders to Upright Support. (Diagram 8) Remove the bolt, washer and spacer from the upper axle using your fingers or the hex key (G) provided. With the indicator arrow (See Diagram 8) facing toward the footpad, slide the top of the resistance cylinder onto the upper axle.
Place the washer and spacer on the bolt. Reinsert the bolt and tighten securely using the hex key provided. Repeat this same step to attach the other resistance cylinder.
Diagram 9
Remove bolts from lower resistance cylinder mounts.
Bolt
Washer (718e only)
U-shaped mount
Nut
Stair arm
6.Connect Resistance Cylinders to Stair Arms. (Diagrams 9 and 10) The washers, nut, and bolt need to be removed from the lower resistance cylinder mount
Note: Perform the following steps on one stair arm at a time.
Page 10