Precor 723e, 718e owner manual Install the batteries AA battery case Battery drawer

Diagram 14

Install electronic console (718e).

Electronic console

Phillips-head screws

Handrail console

c.Align the holes and insert two phillips-head screws (F) on the underside of the handrail console.

d.Tighten the screws using your phillips-head screwdriver.

Diagram 15

Install the batteries

AA battery case

Battery drawer

9.Insert Batteries. (Diagram 15) Find the drawer on the side of the electronic console and press in lightly to open it. Pull the drawer out with your fingers. Take the following steps to insert the batteries:

a.Slide the drawer out to expose the battery case. Place the two “AA” alkaline batteries (found in the hardware kit) into the case. Align the batteries to the proper polarity (+ and - indicators are inside the battery case). The entire display lights and the console beeps.

b.Close the battery drawer by pushing it gently into the electronic console.

c.Press START/STOP to activate the timer (TIME display). Press RESET to “reset” the displays to zero. For more information, refer to the section titled, Understanding the Electronic Console.

Page 13