Introducing Users to the P20 Console | 31 |
If the restart switch trips during exercise, perform the following steps:
1.Reattach the safety clip if necessary.
2.Press the restart switch down until it clicks, returning it to its normal position.
Note: If the restart switch trips, all information about the current workout is deleted.
3.Start the workout from the beginning, reducing the time as needed to account for the amount of exercise that has been completed.
Figure 7: Attaching the safety clip
Treadmill Auto Stop™ (Automatic Stop) Function
Important: The default setting for this feature is ON. An administrator can turn off this feature in the System Settings; however, Precor recommends it remain ON.
The Auto Stop™ (Automatic Stop) feature is designed to bring the treadmill to a gradual stop when it is not in use. This might occur if a user steps off the treadmill before the end of a workout and leaves the treadmill running.
Sixty seconds after a treadmill workout starts or resumes, the equipment begins Auto Stop monitoring. If a user is detected, then no message appears, and the selected workout continues.