Meijer.com
ASSEMBLY
• To hire an authorized service technician to | • In addition to the included tool(s), assembly |
assemble the elliptical, call | requires the following tools: |
• Assembly requires two persons. | one Phillips screwdriver |
• Place all parts in a cleared area and remove the | one rubber mallet |
packing materials. Do not dispose of the packing | Assembly may be easier if you have your own |
materials until you complete all assembly steps. | |
| set of wrenches. To avoid damaging parts, do not |
• To identify small parts, see page 5. | use power tools. |
1.Pull the Folding Frame (2) back until it locks into position. Then, see HOW TO FOLD AND UNFOLD THE ELLIPTICAL on page 15 and unfold the elliptical.
Tip: It may be easier to perform this step with the elliptical in the folded position.
Orient the Rear Stabilizer (4) as shown.
While a second person lifts the Folding Frame (2), attach the Rear Stabilizer (4) to the Folding Frame with two M10 x 120mm Screws (100) and two M10 Split Washers (128).
1
4
128 | 2 |
2.Orient the Front Stabilizer (3) as shown.
While a second person lifts the Frame (1), attach the Front Stabilizer (3) to the Frame with two M10 x 120mm Screws (100) and two M10 Split Washers (128).
100
2
128
100
3
1
6