ProForm PFEL55911.7 user manual Maintenance and Troubleshooting, Console Troubleshooting

Page 24

Meijer.com

MAINTENANCE AND TROUBLESHOOTING

Inspect and tighten all parts of the elliptical regularly. Replace any worn parts immediately.

Next, locate the Reed Switch (69). Loosen, but do not remove, the M4 x 16mm Screw (93).

To clean the elliptical, use a damp cloth and a small amount of mild soap. IMPORTANT: To avoid damage to the console, keep liquids away from the console and keep the console out of direct sunlight.

CONSOLE TROUBLESHOOTING

If the console does not display your heart rate when you hold the handgrip heart rate monitor, or if the dis- played heart rate appears to be too high or too low, see step 5 on page 19.

HOW TO ADJUST THE REED SWITCH

If the console does not display correct feedback, the reed switch should be adjusted.

	93
69	74
69
	75

To adjust the reed switch, you must first remove the Top Shield (20). Using a flat screwdriver, release the tabs on the front and rear of the Top Shield and then remove the Top Shield.

20

Next, rotate the Large Pulley (74) until a Magnet (75) is aligned with the Reed Switch (69). Slide the Reed Switch slightly toward or away from the Magnet. Then, retighten the M4 x 16mm Screw (93).

Rotate the Large Pulley (74) for a moment. Repeat these actions until the console displays correct feedback.

When the reed switch is correctly adjusted, reattach the top shield.

24

Image 24

Contents QUESTIONS? Model No. PFEL55911.7 Serial NoCall TOLL-FREE Mon.–-Fri., 6 a.m.–-6 p.m. MT Sat a.m.–-4 p.m. MTTable of Contents Important Precautions Before YOU Begin Part Identification Chart Assembly Recessed Holes 109 Do not tighten the Screws yet Grease 118 Repeat this step on the other side of the elliptical 123 102 Grease 126 Repeat this step on the left side of the elliptical Avoid pinching Wires Tip Avoid pinching the wires . Attach HOW to USE the Elliptical HOW to Plug in the Power AdapterHOW to Move the Elliptical HOW to Fold and Unfold the EllipticalHOW to Level the Elliptical Console Diagram Features of the Console HOW to USE the Manual Mode Select the manual modeChange the resistance of the pedals as desired Follow your progress with the displayMeijer.com HOW to USE AN Onboard Workout Select an onboard workoutBegin pedaling to start the workout HOW to USE AN Ifit Live Workout Insert the iFit Live module into the console Select a userSelect an iFit Live workout Start the workout. See onHOW to USE the Sound System HOW to Change Console SettingsFCC Information Maintenance and Troubleshooting Console TroubleshootingHOW to Adjust the Reed Switch HOW to Adjust the Drive Belt Exercise Guidelines Exercise IntensityWorkout Guidelines Exercise FrequencyPart List Description QtyQty Description Exploded Drawing a 100 131 102 Drawingc Ordering Replacement Parts Limited WarrantyIcon Health & Fitness, Inc., 1500 S W., Logan, UT