3.Orient the Small Bumper (13) so that the recessed holes are in the indicated location.
While a second person lifts the Frame (1), attach the Small Bumper (13) to the underside of the Frame with two M4 x 25mm Screws (132).
4.Orient the Upright (5) and the Top Cover (23) as shown. Slide the Top Cover upward onto the Upright.
Have a second person hold the Upright (5) and the Top Cover (23) near the Frame (1).
Connect the Upright Wire (60) to the Frame Wire (109).
Tip: To prevent the Upright Wire (60) from falling into the Upright (5), secure the top of the Upright Wire with a rubber band or tape.
Meijer.com
3
1
13
Recessed
132 Holes
4
5
60
23
109
1
7