ProForm PMTL39708.0 user manual Tighten the Bolts yet

8.	Hold a Bolt Spacer (79) inside the lower end of	8
	the Left Upright (73). Insert an M10 x 96mm Bolt
	(5) with an M10 Star Washer (8) into the Left				5		73
	Upright and the Bolt Spacer. Repeat this step
	with a second Bolt Spacer (79), M10 x 96mm				8
	Bolt (5), and M10 Star Washer (8).
	Orient the Left Upright Spacer (83) and the Left
	Upright (73) as shown. Hold the Left Upright		79
	Spacer and the Left Upright against the Base				83
	(85). Tighten the M10 x 96mm Bolts (5) until the
	heads of the Bolts touch the Upright; do not fully				85
	tighten the Bolts yet.
9.	Press a Base Cap (82) into the Base (85).	9	82
	With the help of a second person, tip the treadmill
	so that the Base (85) is flat on the floor.
				85
10.	Attach the Dumbbell Rack (100) to the Uprights	10
	(73, 78) with four 1/4" x 3/4" Bolts (98) and four			99	98
	1/4" Star Washers (99); do not fully tighten the					100
	Bolts yet.
			73		99	98
							99 98
						98 78
							99
		10