ProForm PMTL39708.0 Make sure that the power cord is unplugged, Do not fully fold the Frame yet

1. Make sure that the power cord is unplugged.	1	77	Hole
With the help of a second person, carefully tip
the treadmill onto its left side. Partially fold the		85
Frame (48) so that the treadmill is more stable;
do not fully fold the Frame yet.	48
Cut the tie securing the Wire Harness (77) to the
Base (85). Next, locate a tie in the indicated hole
in the Base, and use the tie to pull the Wire
Harness out of the hole.
2. Attach two Base Pads (81) to the Base (85) in	2
the locations shown with two M4.2 x 25mm Tek
Screws (2) and two Base Pad Spacers (74).	85		81
Attach the other two Base Pads (81) with only				2
two M4.2 x 25mm Tek Screws (2).

74	81 2
	81 2
74	812

7