ProForm PFTL99908.0 user manual HOW to USE a Weight Loss Workout or a Performance Workout

Page 16

HOW TO USE A WEIGHT LOSS WORKOUT OR A PERFORMANCE WORKOUT

1.Insert the key into the console.

See HOW TO TURN ON THE POWER on page 14.

2.Personalize console settings if desired. See HOW TO PERSONALIZE CONSOLE SET- TINGS on page 20.

3.Select a weight loss workout or a performance workout.

To select one of the eight weight loss workouts or one of the eight performance workouts, press the Weight Loss Workouts button or the Performance Workouts button until the name of the desired pre- set workout appears in the display. Note: To return to a previous display, press the Back button.

When you se- lect a weight loss workout or a performance workout, the display will

show the name, the maximum incline setting, the total time, and the maximum speed setting of the workout. In addition, a profile of the speed settings of the workout will appear in the display. If you se- lect a weight loss workout, the display will also show the approximate number of calories you will burn.

Each preset workout is divided into one-minute segments. One speed setting and one incline set- ting are programmed for each segment. Note: The same speed and/or incline setting may be pro- grammed for consecutive segments.

4.Press the Start button to start the workout. A moment after you press the Start button, the treadmill will automatically adjust to the first speed and incline settings of the workout. Hold the handrails and begin walking.

During the program, the profile will show your progress. The flashing segment of the profile repre- sents the current segment of the program. The

height of the flashing segment indicates the speed setting for the current segment. At the end of each segment, a series of tones will sound and the next segment of the profile will begin to flash and the speed and incline setting will appear in the display to alert you. The speed and incline will automati- cally adjust to the speed and incline settings pro- grammed for the next segment.

The program will continue in this way until the last segment of the profile flashes in the display and the last segment ends. The walking belt will then slow to a stop.

If the speed or incline setting for the current seg- ment is too high or too low, you can manually over- ride the setting by pressing the speed and incline buttons. Every few times a speed button is pressed, an additional indicator will appear or dis- appear in the current segment column. However, when the current segment of the program ends, the treadmill will automatically adjust to the speed and incline settings for the next segment. To stop the program at any time, press the Stop button. To restart the program, press the Start but- ton or the Speed increase button. The walking belt will begin to move at 1 mph. When the next seg- ment of the program begins, the treadmill will auto- matically adjust to the speed and incline settings for that segment.

5.Follow your progress with the display. See step 6 on page 15.

Instead of displaying pace, the display will show your exercise intensity in METs. One MET is the amount of energy you use while resting.

6.Measure your heart rate if desired. See step 7 on page 15.

7.Turn on the fan if desired. See step 8 on page 15.

8.When you are finished exercising, remove the key from the console.

See step 9 on page 15.

16

Page 15 Page 17
Image 16
Page 15 Page 17
Contents QUESTIONS? Model No. PFTL99908.0 Serial NoMon.-Fri a.m.-6 p.m. MST Sat a.m.-4 p.m. MST On the WEBTable of Contents Pulse sensor is not a medical device Important PrecautionsVarious factors, including the users move Page Before YOU Begin Assembly Make sure that the power cord is unplugged Careful not to pinch the Upright WireDo not fully fold the Frame yet Tighten the Nut the Wheel must turn freelyGers do not fully tighten the Bolts yet Be careful not to pinch the Upright WireNot fully fold the Frame yet Connectors should slide together easily Ful not to pinch the wiresTighten the Screws Are not Connected PROPERLY,See steps 4 and 6. Tighten the 3/8 x 4 1/2 Bolts Make sure that no wires are pinched HOW to Plug in the Power Cord Operation and AdjustmentPRE-LUBRICATED Walking Belt Console Diagram Features of the ConsoleNavigation Buttons Key ClipHOW to Turn on the Power HOW to USE the Manual ModeStart the walking belt and adjust the speed Insert the key into the consoleMeasure your heart rate if desired Follow your progress with the displayTurn on the fan if desired HOW to USE a Weight Loss Workout or a Performance Workout Follow your progress with the display. See onInsert an iFit card and select a workout HOW to USE AN Ifit CardPress the Start button to start the workout HOW to USE the Ifit Competition Training Center Measure your heart rate if desired. See on HOW to Personalize Console Settings HOW to View the Fitness Journal Information Mode HOW to USE the Stereo Sound SystemOptional Chest Pulse Sensor HOW to Fold and Move the Treadmill HOW to Move the TreadmillHOW to Lower the Treadmill for USE Troubleshooting Problem The power turns off during useProblem The walking belt slows when walked on TopProblem Solution Exercise Guidelines Exercise IntensityWorkout Guidelines Exercise FrequencyPart LIST-Model No. PFTL99908.0 Key No. Qty DescriptionUserʼs Manual Exploded Drawing A-Model No. PFTL99908.0 R0708A Exploded Drawing B-Model No. PFTL99908.0 R0708A 104 R0708A Exploded Drawing D-Model No. PFTL99908.0 R0708A Limited Warranty Ordering Replacement PartsIcon Health & Fitness, Inc., 1500 S W., Logan, UT

PFTL99908.0 specifications

The ProForm PFTL99908.0 is a state-of-the-art treadmill designed to deliver an exceptional workout experience for fitness enthusiasts at all levels. Engineered with a range of advanced features, this treadmill caters to both casual walkers and serious runners, making it a versatile addition to any home gym.

One of the standout features of the ProForm PFTL99908.0 is its powerful motor, which delivers a smooth and consistent performance during workouts. With a 3.0 HP commercial-grade motor, users can run at varying speeds and inclines, ensuring a challenging workout. The speed range of up to 12 mph allows for high-intensity interval training, while the incline option provides additional resistance to enhance calorie burn and muscle engagement.

The running surface is designed for comfort and safety, featuring a spacious 20 x 60-inch belt that can accommodate users of all sizes. The ProForm PFTL99908.0 integrates the patented ProShox cushioning system, significantly reducing impact on joints, which is crucial for long-distance runners or those with joint concerns.

One of the remarkable technologies embedded in the ProForm PFTL99908.0 is the iFit compatibility. This feature allows users to access a vast library of interactive workouts that are led by professional trainers. Users can customize their workout plans, track their progress, and even enjoy virtual outdoor runs in various global locations, making exercise more engaging and effective.

The console is user-friendly and features a high-definition touchscreen display that provides real-time information on speed, distance, time, and calories burned. Additionally, it includes quick-access buttons for incline and speed adjustments to ensure seamless transitions during workouts.

Furthermore, the ProForm PFTL99908.0 is equipped with Bluetooth connectivity, allowing users to connect their devices for music streaming—enhancing the workout environment. Other thoughtful features include built-in speakers, a fan for cooling, and integrated tablet holders for media consumption.

In terms of assembly and storage, the ProForm PFTL99908.0 features a SpaceSaver design with a hydraulic foldable mechanism, making it easy to stow away when not in use. This practicality, combined with its robust build quality and advanced technology, makes the ProForm PFTL99908.0 a top choice for anyone looking to enhance their fitness journey from the comfort of home.
Top Page Image Contents