ProForm PFTL99908.0 user manual Top, Problem The walking belt slows when walked on

Page 27

Remove the three #8 x 3/4" Screws (1) and care-

 

 

1

fully pivot the Hood (61) off.

 

 

 

 

61

 

Locate the Reed Switch (71) and the Magnet (50)

 

 

 

on the left side of the Pulley (51). Turn the Pulley

 

 

 

until the Magnet is aligned with the Reed Switch.

 

 

 

Make sure that the gap between the Magnet and

 

1/8 in.

 

the Reed Switch is about 1/8 in. (3 mm). If neces-

 

 

sary, loosen the 3/4" Reed Switch Screw (15),

 

71

50

move the Reed Switch slightly, and then retighten

 

the Screw. Reattach the Hood (not shown). If nec-

 

Top

51

essary, tip down the Uprights (not shown), reattach

 

 

the #8 x 2" Screws (not shown), and raise the

 

View

 

Uprights. Run the treadmill for a few minutes to

 

 

check for a correct speed reading.

 

 

 

PROBLEM: The incline of the treadmill does not change correctly

 

 

 

SOLUTION: a. Hold down the Stop button and the Speed increase button, insert the key into the console, and

then release the Stop button and the Speed increase button. Press the Incline increase or de-

crease button. The treadmill will automatically rise to the maximum incline level and then return to

the minimum level. This will recalibrate the incline system. If the incline does not calibrate, press

the Stop button, and then press the Incline increase or decrease button again. When the incline is

calibrated, remove the key from the console.

 

 

 

PROBLEM: The walking belt slows when walked on

 

 

 

SOLUTION: a. Use only a single-outlet surge suppressor that meets all of the specifications described on page 12.

b. If the walking belt is overtightened, treadmill perfor-

b

 

 

mance may decrease and the walking belt may be-

2–3 in.

 

come damaged. Remove the key and UNPLUG

 

 

THE POWER CORD. Using the hex key, turn both

 

 

 

rear roller bolts counterclockwise, 1/4 of a turn.

 

 

 

When the walking belt is properly tightened, you

 

 

 

should be able to lift each edge of the walking belt

 

 

 

2 to 3 in. (5 to 7 cm) off the walking platform. Be

 

 

 

careful to keep the walking belt centered. Then,

 

 

 

plug in the power cord, insert the key, and run the

Rear Roller Bolts

 

treadmill for a few minutes. Repeat until the walk-

 

ing belt is properly tightened.

 

 

 

c. If the walking belt still slows when walked on, see the front cover of this manual.

 

27

Page 26 Page 28
Image 27
Page 26 Page 28
Contents On the WEB QUESTIONS?Model No. PFTL99908.0 Serial No Mon.-Fri a.m.-6 p.m. MST Sat a.m.-4 p.m. MSTTable of Contents Important Precautions Pulse sensor is not a medical deviceVarious factors, including the users move Page Before YOU Begin Assembly Tighten the Nut the Wheel must turn freely Make sure that the power cord is unpluggedCareful not to pinch the Upright Wire Do not fully fold the Frame yetBe careful not to pinch the Upright Wire Gers do not fully tighten the Bolts yetNot fully fold the Frame yet Are not Connected PROPERLY, Connectors should slide together easilyFul not to pinch the wires Tighten the ScrewsSee steps 4 and 6. Tighten the 3/8 x 4 1/2 Bolts Make sure that no wires are pinched Operation and Adjustment HOW to Plug in the Power CordPRE-LUBRICATED Walking Belt Key Clip Console DiagramFeatures of the Console Navigation ButtonsInsert the key into the console HOW to Turn on the PowerHOW to USE the Manual Mode Start the walking belt and adjust the speedFollow your progress with the display Measure your heart rate if desiredTurn on the fan if desired Follow your progress with the display. See on HOW to USE a Weight Loss Workout or a Performance WorkoutHOW to USE AN Ifit Card Insert an iFit card and select a workoutPress the Start button to start the workout HOW to USE the Ifit Competition Training Center Measure your heart rate if desired. See on HOW to Personalize Console Settings HOW to View the Fitness Journal HOW to USE the Stereo Sound System Information ModeOptional Chest Pulse Sensor HOW to Move the Treadmill HOW to Fold and Move the TreadmillHOW to Lower the Treadmill for USE Problem The power turns off during use TroubleshootingTop Problem The walking belt slows when walked onProblem Solution Exercise Frequency Exercise GuidelinesExercise Intensity Workout GuidelinesKey No. Qty Description Part LIST-Model No. PFTL99908.0Userʼs Manual Exploded Drawing A-Model No. PFTL99908.0 R0708A Exploded Drawing B-Model No. PFTL99908.0 R0708A 104 R0708A Exploded Drawing D-Model No. PFTL99908.0 R0708A Ordering Replacement Parts Limited WarrantyIcon Health & Fitness, Inc., 1500 S W., Logan, UT

PFTL99908.0 specifications

The ProForm PFTL99908.0 is a state-of-the-art treadmill designed to deliver an exceptional workout experience for fitness enthusiasts at all levels. Engineered with a range of advanced features, this treadmill caters to both casual walkers and serious runners, making it a versatile addition to any home gym.

One of the standout features of the ProForm PFTL99908.0 is its powerful motor, which delivers a smooth and consistent performance during workouts. With a 3.0 HP commercial-grade motor, users can run at varying speeds and inclines, ensuring a challenging workout. The speed range of up to 12 mph allows for high-intensity interval training, while the incline option provides additional resistance to enhance calorie burn and muscle engagement.

The running surface is designed for comfort and safety, featuring a spacious 20 x 60-inch belt that can accommodate users of all sizes. The ProForm PFTL99908.0 integrates the patented ProShox cushioning system, significantly reducing impact on joints, which is crucial for long-distance runners or those with joint concerns.

One of the remarkable technologies embedded in the ProForm PFTL99908.0 is the iFit compatibility. This feature allows users to access a vast library of interactive workouts that are led by professional trainers. Users can customize their workout plans, track their progress, and even enjoy virtual outdoor runs in various global locations, making exercise more engaging and effective.

The console is user-friendly and features a high-definition touchscreen display that provides real-time information on speed, distance, time, and calories burned. Additionally, it includes quick-access buttons for incline and speed adjustments to ensure seamless transitions during workouts.

Furthermore, the ProForm PFTL99908.0 is equipped with Bluetooth connectivity, allowing users to connect their devices for music streaming—enhancing the workout environment. Other thoughtful features include built-in speakers, a fan for cooling, and integrated tablet holders for media consumption.

In terms of assembly and storage, the ProForm PFTL99908.0 features a SpaceSaver design with a hydraulic foldable mechanism, making it easy to stow away when not in use. This practicality, combined with its robust build quality and advanced technology, makes the ProForm PFTL99908.0 a top choice for anyone looking to enhance their fitness journey from the comfort of home.
Top Page Image Contents