ProForm PFTL72707.0 user manual Information Mode, Optional Chest Pulse Sensor

Page 18

THE INFORMATION MODE

The console features an information mode that keeps track of treadmill usage information. The information mode also allows you to select miles or kilometers as the unit of measurement, to select an audio trainer set- ting, and to turn on and turn off the demo mode.

To select the information mode, hold down the Stop button, insert the key into the console, and then release the Stop button. When the information mode is se- lected, the following information will appear in the dis- play:

The center of

the display will show the total number of hours

that the treadmill

has been oper- ated. The lower part of the dis- play will show

the total number of miles or kilometers that the walking belt has moved. In addition, an “E” for English miles or an “M” for metric kilometers will appear in the lower part of the display. To change the unit of measurement, press the Speed increase button.

The upper left part of the dis-

play will show the personal trainer audio setting. If you select “ON” as the audio set-

ting, the personal trainer will guide you through your work-

outs and give detailed in-

structions. If you select the “OFF” setting, your per- sonal trainer will simply guide you through your work- outs. Press the Incline decrease button to change the audio setting if desired.

You can adjust the volume

of the personal trainer audio (0 through 5) by pressing the Incline in-

crease button repeatedly. The volume setting ap-

pears as the upper right digit in the display.

Note: The console features

a display demo mode, de- signed to be used if the treadmill is displayed in a store. While the demo mode

is turned on, the console will

function normally when you plug in the power cord, switch the reset/off circuit breaker to the reset position, and insert the key into the console. However, when you remove the key, the displays will remain lit, al- though the buttons will not function. If the demo mode is turned on, a “d” will appear in the display while the in- formation mode is selected. To turn on or turn off the demo mode, press the Speed decrease button.

To exit the information mode, remove the key from the console.

THE OPTIONAL CHEST PULSE SENSOR

An optional chest pulse sensor offers hands-free oper- ation as it tracks your heart rate during your workouts.

To purchase the optional chest pulse sensor, call the telephone number on the front cover of this manual.

18

Image 18
Contents QUESTIONS? Model No. PFTL72707.0 Serial NoCall TOLL-FREE Table of Contents Important Precautions Page Before YOU Begin Assembly Make sure that the power cord is unpluggedPage Be Damaged When the Power is Nected PROPERLY, the Console MAYMake sure that no wires are pinched Operation and Adjustment HOW to Plug in the Power CordPRE-LUBRICATED Walking Belt Console Diagram Features of the ConsoleHOW to Turn on the Power HOW to USE the Manual ModeMeasure your heart rate if desired Turn on the fan if desiredHOW to USE a Cross Trainer Program Select one of the nine cross trainer programsPress the Start button to start the program Perform the first strength exercise when prompted Continue the cross trainer programSelect one of the custom programs HOW to Create a Custom ProgramSpeed and incline settings Press the Start button and program the desiredHOW to USE a Custom Program Information Mode Optional Chest Pulse SensorHOW to Fold and Move the Treadmill HOW to Fold the Treadmill for StorageHOW to Move the Treadmill HOW to Lower the Treadmill for USE Troubleshooting Problem The power turns off during useProblem The walking belt slows when walked on Top View Page Workout Guidelines Exercise GuidelinesExercise Intensity Exercise FrequencySuggested Stretches R0907A Key Qty DescriptionPage Drawinga Exploded Drawing B-Model No. PFTL72707.0 R0907A Exploded Drawing C-Model No. PFTL72707.0 R0907A Exploded Drawing D-Model No. PFTL72707.0 R0907A Ordering Replacement Parts Limited WarrantyIcon Health & FITNESS, INC., 1500 S W., LOGAN, UT