ProForm PFTL72707.0 user manual

Page 4

20.Use the included dumbbells only as de- scribed in this manual. Properly store the dumbbells in the dumbbell holders on the console when you are not using them (see the drawing on page 5). If the dumbbells are im- properly stored, they may fall off the console, causing the user to trip.

21.Never leave the treadmill unattended while it is running. Always remove the key, unplug the power cord, and switch the reset/off cir- cuit breaker to the off position when the treadmill is not in use. (See the drawing on page 5 for the location of the circuit breaker.)

22.Do not attempt to raise, lower, or move the treadmill until it is properly assembled. (See ASSEMBLY on page 6, and HOW TO FOLD AND MOVE THE TREADMILL on page 19.) You must be able to safely lift 45 lbs. (20 kg) to raise, lower, or move the treadmill.

23.When folding or moving the treadmill, make sure that the storage latch is fully closed.

24.Never insert any object into any opening on the treadmill.

25.Inspect and properly tighten all parts of the treadmill regularly.

26.DANGER: Always unplug the power cord immediately after use, before cleaning the treadmill, and before performing the mainte- nance and adjustment procedures described in this manual. Never remove the motor hood un- less instructed to do so by an authorized ser- vice representative. Servicing other than the procedures in this manual should be performed by an authorized service representative only.

27.This treadmill is intended for in-home use only. Do not use this treadmill in a commer- cial, rental, or institutional setting.

SAVE THESE INSTRUCTIONS

4

Image 4
Contents Model No. PFTL72707.0 Serial No QUESTIONS?Call TOLL-FREE Table of Contents Important Precautions Page Before YOU Begin Assembly Make sure that the power cord is unpluggedPage Be Damaged When the Power is Nected PROPERLY, the Console MAYMake sure that no wires are pinched HOW to Plug in the Power Cord Operation and AdjustmentPRE-LUBRICATED Walking Belt Console Diagram Features of the ConsoleHOW to Turn on the Power HOW to USE the Manual ModeMeasure your heart rate if desired Turn on the fan if desiredSelect one of the nine cross trainer programs HOW to USE a Cross Trainer ProgramPress the Start button to start the program Perform the first strength exercise when prompted Continue the cross trainer programHOW to Create a Custom Program Speed and incline settingsSelect one of the custom programs Press the Start button and program the desiredHOW to USE a Custom Program Information Mode Optional Chest Pulse SensorHOW to Fold the Treadmill for Storage HOW to Fold and Move the TreadmillHOW to Move the Treadmill HOW to Lower the Treadmill for USE Troubleshooting Problem The power turns off during useProblem The walking belt slows when walked on Top View Page Exercise Guidelines Exercise IntensityWorkout Guidelines Exercise FrequencySuggested Stretches R0907A Key Qty DescriptionPage Drawinga Exploded Drawing B-Model No. PFTL72707.0 R0907A Exploded Drawing C-Model No. PFTL72707.0 R0907A Exploded Drawing D-Model No. PFTL72707.0 R0907A Limited Warranty Ordering Replacement PartsIcon Health & FITNESS, INC., 1500 S W., LOGAN, UT