ProForm PFTL56007.0 user manual HOW to USE the Performance Program, Select the performance program

Page 20

HOW TO USE THE PERFORMANCE PROGRAM

1.Insert the key into the console.

See HOW TO TURN ON THE POWER on page 13.

2.Select the performance program.

To select the

performance program, press the Perform- ance button; “P12” will ap- pear in the

display. A

few seconds after the performance program is se- lected, the maximum speed setting, the maximum incline setting, and the duration of the program will flash in the display for a few seconds. A profile of the speed settings of the program will scroll across the display.

3.Press the Start button to start the program.

A moment after you press the Start button, the treadmill will automatically adjust to the first speed and incline settings for the program. Hold the handrails and begin walking.

The program is divided into 60 one-minute seg- ments. One speed setting and one incline setting are programmed for each segment. Note: The same speed setting and/or incline setting may be programmed for consecutive segments.

the profile represents the current segment of the program. The height of the flashing segment indi- cates the speed setting for the current segment. At the end of each segment, a series of tones will sound, the next segment of the profile will begin to flash and the speed and incline setting will appear in the display to alert you.

The program will continue in this way until the last segment of the profile flashes in the display and the last segment ends. The walking belt will then slow to a stop.

If the speed or incline setting for the current seg- ment is too high or too low, you can manually over- ride the setting by pressing the Speed and Incline buttons; however, when the next segment of the program begins, the treadmill will automatically adjust to the speed and incline settings for the next segment.

To stop the program at any time, press the Stop button. To restart the program, press the Start but- ton or the Speed increase button. The walking belt will begin to move at 1 mph. When the next seg- ment of the program begins, the treadmill will auto- matically adjust to the speed and incline settings for the next segment.

4.

Follow your progress with the display.

 

See step 5 on page 14.

5.

Measure your heart rate if desired.

 

See step 6 on page 15.

6.

Turn on the fan if desired.

During the program, the profile will show your progress. The flashing segment of

Current Segment

See step 7 on page 15.

7. When you are finished exercising, remove the

key from the console.

See step 8 on page 15.

20

Image 20
Contents Call TOLL-FREE QUESTIONS?Model No. PFTL56007.0 Serial No Table of Contents Important Precautions Page Before YOU Begin Assembly Make sure that the power cord is unpluggedBe careful not to pinch the Wire Harness Fully tighten the Upright Bolts yetConsole Bolts and then firmly tighten them Again. if the Connectors are not CONAvoid pinching the wires. While a second per Not to overtighten the Upright Bolts Top ViewWire PRE-LUBRICATED Walking Belt Operation and AdjustmentHOW to Plug in the Power Cord Console Diagram Features of the Console HOW to Turn on the Power HOW to USE the Manual ModeSelect the manual mode Insert the key into the consoleChange the incline of the treadmill as desired Follow your progress with the displayMeasure your heart rate if desired Turn on the fan if desiredPress the Start button to start the program HOW to USE a Cross Trainer ProgramSelect one of the six cross trainer programs Perform the first strength exercise when prompted Continue the cross trainer programHOW to USE the 5K Program Select the 5K programHOW to USE a Weight Loss Program Select a weight loss programWhen you are finished exercising, remove See onHOW to USE the Performance Program Select the performance programInformation Mode Optional Chest Pulse SensorHOW to USE the Upper Body Arms HOW to Move the Treadmill HOW to Fold and Move the TreadmillHOW to Fold the Treadmill for Storage HOW to Lower the Treadmill for USE Troubleshooting Problem The power turns off during useProblem The walking belt slows when walked on TopPage Exercise Guidelines Exercise IntensityWorkout Guidelines Exercise FrequencySuggested Stretches R0108A Qty DescriptionDescription Drawing a Exploded Drawing B-Model No. PFTL56007.0 Exploded Drawing C-Model No. PFTL56007.0 Exploded Drawing D-Model No. PFTL56007.0 Icon Health & FITNESS, INC., 1500 S W., LOGAN, UT Ordering Replacement PartsLimited Warranty