ProForm PFTL57807.0 user manual Assembly

Page 6

ASSEMBLY

To hire an authorized service technician to assemble the treadmill, call 1-800-445-2480.

Assembly requires two persons. Set the treadmill in a cleared area and remove all packing materials. Do not dispose of the packing materials until assembly is completed. Note: The underside of the treadmill walking belt is coated with high-performance lubricant. During shipping, a small amount of lubricant may be transferred to the top of the walking belt or the shipping carton. This is a normal condition and does not affect treadmill perfor- mance. If there is lubricant on top of the walking belt, simply wipe off the lubricant with a soft cloth and a mild, non-abrasive cleaner.

Assembly requires the included hex keys

and your own Phillips screwdriver

,

adjustable wrench

, scissors

, and needlenose pliers

.

Use the drawings below to identify the assembly hardware. The number in parentheses below each drawing is the key number of the part, from the PART LIST near the end of this manual. The number after the parentheses is the quantity needed for assembly. Note: If a part is not in the hardware kit, check to see if it is preattached to one of the parts to be assembled. Extra hardware may be included. To avoid damaging plastic parts, do not use power tools for assembly.

M4.2 x 19mm

M4.2 x 25mm

#10 x 1" Tek

M4 x 20mm

 

Screw (1)–4

Screw (2)–4

 

Screw (76)–2

Screw (3)–2

 

 

 

 

 

 

 

Base Pad Spacer

 

 

 

 

 

 

(104)–2

M4.2 Star

 

 

 

 

 

 

Washer (70)–2

M8 Star

 

M10 Star

 

 

 

 

 

Bolt Spacer (79)–4

 

 

Washer (10)–4

Washer (8)–4

M8 x 25mm Bolt (6)–4

 

 

 

M10 x 96mm Bolt (5)–4

 

6

Image 6
Contents Call TOLL-FREE QUESTIONS?Please do not Contact On the WEBTable of Contents Important Precautions Page Before YOU Begin Assembly Make sure that the power cord is unplugged Page Your fingers do not fully tighten the Bolts yet Not fully fold the Frame yetTighten the Nut the Wheel must turn freely Screws for stepPage That no wires are pinched Tighten all four BoltsSmall Wire Screws Cylinder 116 Operation and Adjustment HOW to Plug in the Power CordPRE-LUBRICATED Walking Belt Console Diagram Features of the ConsoleHOW to Turn on the Power Select the user modeHOW to Personalize Console Settings Select a default user setting Set the date and timeSelect the manual mode HOW to Identify Yourself AS User 1 or UserHOW to USE the Manual Mode Insert the key into the consoleProgress with the display Select a display mode and monitor yourChange the incline of the treadmill as desired Measure your heart rate if desiredHOW to USE a Personal Trainer Workout Select a personal trainer workoutHOW to View the Fitness Journal Exit the user mode HOW to Reset the Fitness JournalSelect the user mode. See on Reset the fitness journal HOW to USE the Stereo Sound SystemInformation Mode Optional Chest Pulse SensorHOW to Fold and Move the Treadmill HOW to Fold the Treadmill for StorageHOW to Move the Treadmill HOW to Lower the Treadmill for USE Troubleshooting Problem The power turns off during useProblem The walking belt slows when walked on Page Workout Guidelines Exercise GuidelinesExercise Intensity Exercise FrequencySuggested Stretches R0208A Key No. Qty DescriptionKey No. Qty Description Exploded Drawing A-Model No. PFTL57807.0 R0208A Exploded Drawing B-Model No. PFTL57807.0 R0208A Exploded Drawing C-Model No. PFTL57807.0 Exploded Drawing D-Model No. PFTL57807.0 R0208A Ordering Replacement Parts Limited WarrantyIcon Health & FITNESS, INC., 1500 S W., LOGAN, UT