JVC RX-5040B, RX-6042S, RX-6040B manual Basic Settings, Press Quick Speaker Setup, Channel number

Page 20

Basic Settings

Some of the following settings are required after connecting and positioning your speakers while others will make operations easier. You can use QUICK SPEAKER SETUP to easily set up your speaker configuration.

Quick Speaker Setup

Remote

 

NOT

Quick Speaker Setup helps you to easily and quickly register the speaker size and speaker distance according to your listening room to create the best possible surround effect.

You can also register each speaker’s information manually. For details, see page 20.

Before you start, remember...

There is a time limit in doing the following steps. If the setting is canceled before you finish, start from step 1 again.

1 Press QUICK SPEAKER SETUP.

“SPK=” and the initial speaker channel number appear.

Depending on your model, it will be either “5.0CH” or “5.1CH.”

2Turn MULTI JOG to select an appropriate number of the connected speakers (speaker

channel number).

As you turn the jog, the speaker channel number changes as follows.

For the details of speaker channel number, see “Speaker channel number and the size.”

5.0CH 5.1CH 2.0CH 2.1CH 3.0CH 3.1CH 4.0CH 4.1CH (Back to the beginning)

3 Press in MULTI JOG (PUSH SET).

“ROOM SIZE=” and the initial room size setting appear.

4 Turn MULTI JOG to select an appropriate room size to match to your listening room.

As you turn the jog, the room size changes as follows.

To select your appropriate room size, see “Room size and the speaker distance.”

L (Large) S (Small)

M (Medium)

5 Press in MULTI JOG (PUSH SET).

“COMPLETE” appears on the display, then goes back to the source indication.

Notes:

This procedure will not be completed if you stop in the middle of the setting process.

Once Quick Speaker Setup is performed, the speaker output levels are also set to appropriate values automatically (common to all sources). If you want to set the speaker output levels separately for each source, see “Adjusting the Speaker Output Levels” on page 24.

Speaker channel number and the size

You can find how each of the speaker size is defined according to the number of connected speakers (speaker channel “CH” number) you select.

• Subwoofer (S.WFR) is counted as 0.1 channel.

CH

The size of the connected speakers

 

 

 

 

L/R

C

LS/RS

S.WFR

 

 

 

 

 

 

2.0CH

LARGE

NONE

NONE

NO

 

 

 

 

 

2.1CH

SMALL

NONE

NONE

YES

 

 

 

 

 

3.0CH

LARGE

SMALL

NONE

NO

 

 

 

 

 

3.1CH

SMALL

SMALL

NONE

YES

 

 

 

 

 

4.0CH

LARGE

NONE

SMALL

NO

 

 

 

 

 

4.1CH

SMALL

NONE

SMALL

YES

 

 

 

 

 

5.0CH

LARGE

SMALL

SMALL

NO

 

 

 

 

 

5.1CH

SMALL

SMALL

SMALL

YES

 

 

 

 

 

Room size and the speaker distance

According to the selected room size, speaker distance for each activated speaker is set as follows:

Size

Speaker

Distance

 

 

 

L

L/R

3.0 m (10 ft)

 

 

 

(Large)

C

3.0 m (10 ft)

 

 

 

 

LS/RS

3.0 m (10 ft)

 

 

 

M

L/R

2.7 m (9 ft)

 

 

 

(Medium)

C

2.4 m (8 ft)

 

 

 

 

LS/RS

2.1 m (7 ft)

 

 

 

S

L/R

2.4 m (8 ft)

 

 

 

(Small)

C

2.1 m (7 ft)

 

 

 

 

LS/RS

1.5 m (5 ft)

 

 

 

Note:

In the tables above, “L” stands for the left front speaker, “R” for the right front speaker, “C” for the center speaker, “LS” for the left surround speaker, “RS” for the right surround speaker, and “S.WFR” for the subwoofer.

18

Image 20
Contents RX-6040B/RX-6042S RX-5040B/RX-5042S/RX-5045B LVT1140-001A JMises en garde, précautions et indications diverses For U.S.ATable of Contents Parts Identification Front PanelRX-6040B/RX-6042S RX-5040B/RX-5042S/RX-5045BRemote Control DisplayParts Identification Rear PanelRX-6040B/RX-6042S RX-5040B/RX-5042S/RX-5045BBefore Installation Connecting the FM and AM AntennasChecking the Supplied Accessories Putting Batteries in the Remote ControlConnecting the Speakers and Subwoofer Getting StartedAM antenna connections Turn the loop until you have the best receptionConnecting Audio/Video Components Connecting the subwooferPlacing speakers Analog ConnectionsRed Blue Green Video component connectionsIf your video components have an AV Compu Link jack When you connect a DVD player with stereo output jacks Green BlueRed DVD playerDigital Connections Connecting the Power CordPlug the power cord into an AC outlet Basic Operations Daily Operational Procedure Selecting the Source to PlayTurning On the Power Sound Adjusting the VolumeBasic Operations Selecting the Analog or Digital Input Mode Listening with headphonesBe sure to turn down the volume Press Subwoofer OUT ON/OFF to cancel the subwoofer outputPress Dimmer To select the analog input modeChanging the Display Brightness Using the Sleep Timer Basic adjustment auto memoryReinforcing the Bass Muting the SoundTuning in to Stations Manually Using Preset TuningReceiving Radio Broadcasts Select the band FM or AMPress the 10 keys to select a preset channel number Selecting the FM Reception ModeWhile listening to an FM station, press FM Mode To tune in a preset stationBasic Settings Press Quick Speaker SetupChannel number Press in Multi JOG Push SETEx. When setting Auto Surround to Auto Surr on Basic Setting ItemsPress Setting Basic Settings Setting the SpeakersSetting the Speaker Distance Setting the Bass SoundsSetting for Easy and Effective Surround Operations Selecting the Main or Sub ChannelSelect the playback sounds channel Select Auto Surr on to activate Auto SurroundSetting the Digital Input Terminals Setting the Component Video InputThis setting is only for RX-6040B/RX-6042S Select Vrtl SB on to activate Virtual Surround BackAdjusting Sound Basic Adjustment ItemsPress Adjust Ex. When adjusting the subwoofer level toAdjusting the Speaker Output Levels Adjusting SoundAdjusting the Equalization Patterns Using the Surround Modes Reproducing Theater Ambience Introducing the Surround ModesDolby Digital*1 Dolby Digital 5.1CHUsing the Surround Modes DTS Digital SurroundDTS 96/24 3D Headphone Mode-3D H PhonePress Surround to activate the Surround mode To cancel the Surround modeActivating the Surround Modes Activating the Surround Modes AutomaticallyUsing the DSP Modes 3D Headphone ModeReproducing the Sound Field Introducing the DSP ModesTo cancel the DSP mode Multi-channel digital signalsTo adjust the effect level except All Channel Stereo, see Activating the DSP ModesCompu Link Remote Control System Remote Control through the Remote Sensor on the ReceiverPress the play 3 button on the CD player Automatic Source SelectionConnections 2 Video Cable Connection AV Compu Link Remote Control SystemConnections 1 AV Compu Link Connection AV Compu Link Remote Control System Connecting procedurePress CD-DISC, then press Press CD, then press +10 Operating JVC’s Audio/Video ComponentsOperating Audio Components Operating JVC’s Audio/Video Components Operating Video ComponentsCD recorder DVD playerOperating Other Manufacturers’ Video Equipment Release STANDBY/ON TV/CATVTry to operate your Catv converter by pressing Try to operate your TV by pressingOperating Other Manufacturers’ Video Equipment Release STANDBY/ON VCRRelease STANDBY/ON DVD Try to operate your VCR by pressingTroubleshooting Problem Possible Cause SolutionSpecifications Per channel, min. RMS, driven into 8 ΩHz to 20 kHz with no more than 0.8% total Harmonic distortionMain differences between the models FM tuner IHFAM tuner GeneralLimited WARRANTYAUDIO-2 Do not service the television yourself Toll Free 1 800RX-5040B/RXRX-6040B/RX -5042S/RX-6042S -5045B LVT1140-002A C Mises en garde, précautions et indications diverses English Parts Identification 3 4 5 6 7 8 90 -= ~ ! @ Monitor Audioout Do not insert any metal object into the receiver Getting Started You can enhance the bass by connecting a subwoofer Video component connections DVD player Connecting the Power Cord Basic Operations Basic Operations Turning On and Off When Dolby Digital or DTS Surround is selected Press Bassboost to boost the bass level Tuning in to Stations Manually Selecting the FM Reception Mode Basic Settings Basic Procedure Front speakers 0m 10FT Center speaker Surround speakers 9FT Selecting the Main or Sub Channel Setting the Digital Input Terminals Press in Multi JOG Push SET Adjusting Sound Using the Surround Modes Using the Surround Modes Activating the Surround Modes Using the DSP Modes Activating the DSP Modes Compu Link Remote Control System This receiver AV Compu Link Remote Control System Operating JVC’s Audio/Video Components Set the TV/CATV selector to TV Operating Other Manufacturers’ Video Equipment Operating Other Manufacturers’ Video Equipment Troubleshooting Specifications Main differences between the models EN, FR Victor Company of JAPAN, Limited 0104RYMMDWJEIN