JVC RX-6040B Press FM/AM to select the band, Press the 10 keys to select a preset channel number

To tune in a preset station

On the front panel:

1Select the band (FM or AM).

•For RX-6040B/RX-6042S: Press FM or AM.

•For RX-5040B/RX-5042S/RX-5045B: Press FM/AM. Each time you press the button, the band alternates between FM and AM.

2Press FM/AM PRESET 5 or ∞ until you find the channel you want.

•Pressing FM/AM PRESET 5 increases the number.

•Pressing FM/AM PRESET ∞ decreases the number.

On the remote control:

1 2 3

4 5 6

7 8 9

1010

TA/NEWS/INFO

REWFF

REC PAUSE CD-DISC

FM/AM

1 Press FM/AM to select the band.

The last received station of the selected band is tuned in.

•Each time you press the button, the band alternates between FM and AM.

2Press the 10 keys to select a preset channel number.

•For channel number 5, press 5.

•For channel number 15, press +10 then 5.

•For channel number 20, press +10 then 10.

•For channel number 30, press +10, +10, then 10.

Note:

When you use the 10 keys on the remote control, be sure that they are activated for the tuner, not for the CD and others. (See page 33.)

Selecting the FM Reception Mode

When an FM stereo broadcast is hard to receive or noisy, you can change the FM reception mode while receiving an FM broadcast.

•You can store the FM reception mode for each preset station (see page 16).

While listening to an FM station, press FM MODE.

•Each time you press the button, the FM reception mode alternates between “AUTO MUTING” and “MODE MONO.”

TUNED STEREO AUTO MUTING

AUTO MUTING MODE MONO

AUTO MUTING: Normally select this.

When a program is broadcasted in stereo, you will hear stereo sound; when in monaural, you will hear monaural sounds. This mode is also useful to suppress static noise between stations.

The AUTO MUTING indicator lights up on the display. (Initial setting)

MODE MONO: Select this to improve the reception (but stereo effect will be lost).

In this mode, you will hear noise while tuning in to the stations.

The AUTO MUTING indicator goes off from the display (the STEREO indicator goes off).

Note:

After you operate any source other than the tuner using the remote control, the FM MODE button on the remote control does not work. In this case, press FM/AM on the remote control, then press FM MODE.

17