JVC RX-6042S manual AV Compu Link Remote Control System, Connections 1 AV Compu Link Connection

AV COMPU LINK Remote Control System

The AV COMPU LINK remote control system allows you to operate JVC’s video components (TV, VCR, and DVD player) through the receiver.

RX-5040B/RX-5042S/RX-5045B are equipped with conventional AV COMPU LINK, while RX-6040B/RX-6042S are equipped with the AV COMPU LINK-III, which adds a function to operate JVC’s video components through the component video jacks.

To use this remote control system, connect the video components you want to operate, following the diagrams below and the procedure on the next page.

CONNECTIONS 1: AV COMPU LINK Connection

RX-6040B/RX-6042S

AV

COMPU LINK – III

RX-5040B/RX-5042S/RX-5045B

AV

COMPU LINK

VCR DVD player This receiver TV

VHS

AV

COMPU LINK

CAUTION:

DVD

AV

COMPU LINK

AV

COMPU LINK EX

AV

COMPU LINK-ΙΙΙ

You can only connect to the TV with the AV COMPU LINK EX or AV COMPU LINK-III jack.

DO NOT connect to the TV with AV COMPU LINK RECEIVER/AMP jack.

Notes:

•For RX-6040B/RX-6042S: When connecting the receiver and a TV with the AV COMPU LINK EX jack by using a component video cable, you cannot use automatic selection of TV’s input mode (see page 32).

•Make sure that the remote control code for the connected VCR is set to code “A.”

•When connecting only the VCR or DVD player to the receiver, connect it directly to the receiver using cables with the monaural mini-plugs.

CONNECTIONS 2: Video Cable Connection

Connect the VCR and/or DVD player to the TV using one of the following methods:

•For RX-6040B/RX-6042S: When using the AV COMPU LINK remote control system, set the component video input for the DVD player and the VCR correctly (see “Setting the Component Video Input” on page 22); otherwise, the correct input for this receiver will not be selected on the TV.

CASE 1	When connecting the source equipment to the receiver through the S-video jacks, connect the receiver
	to the TV’s video input 1 jack (S-video input) using S-video cables.
(Only for
		Source		This receiver		TV
RX-6040B/
		equipment	S-video cable		S-video cable
RX-6042S)
						To video input 1
	When connecting the source equipment to the receiver through the composite video jacks, connect
	the receiver to the TV’s video input 2 jack (composite video input) using composite video cables.
CASE 2
		Source		This receiver		TV
		equipment	Composite		Composite
			video cable		video cable	To video input 2
	When connecting the source equipment to the receiver through the component video jacks, connect
CASE 3	the receiver to the TV’s video input 2 jack (component video input) using component video cables.
(Only for		Source		This receiver		TV
RX-6040B/		equipment	Component		Component
RX-6042S)
			video cable		video cable	To video input 2

31