JVC RX-6040B, RX-6042S Basic Operations, Daily Operational Procedure Selecting the Source to Play

Basic Operations

The following operations are commonly used when you play any sound sources.

Operations hereafter will be explained using the buttons on the front panel.

You can also use the buttons on the remote control for the same functions if they have the same and similar names/marks.

Daily Operational Procedure Selecting the Source to Play

1Turn on the power.

•See “Turning On the Power” below.

2Select the source.

•See “Selecting the Source to Play” to the right.

3Adjust the volume.

•See “Adjusting the Volume” on page 12.

4Select the Surround or DSP modes.

•See “Activating the Surround Modes” (page 27) and “Activating the DSP Modes” (page 29).

Turning On the Power

Press STANDBY/ON (or STANDBY/ON AUDIO on the remote control).

The STANDBY lamp goes off.

Current source name appears.

VOLUME

Current volume level appears.

To turn off the power (into standby mode),

press STANDBY/ON (or STANDBY/ON AUDIO on the remote control) again.

The STANDBY lamp lights up.

Note:

A small amount of power is consumed in standby mode. To turn off the power completely, unplug the AC power cord.

When you have connected digital source components using the digital terminals, first change the input mode for these components to the digital input mode (see page 13).

Press one of the source selection buttons.

Selected source name appears.

VOLUME

For RX-6040B/RX-6042S

DVD MULTI	DVD	VCR	TV SOUND	CD	TAPE/CDR	FM	AM
					SOURCE NAME
		On the front panel
		TAPE/CDR	CD	DVD	DVD MULTI
		FM/AM	TV SOUND	VCR

On the remote

Note:

When you select “DVD MULTI,” you can enjoy analog discrete output sound (5.1-channel surround reproduction) from the external component.

•You may need to select analog discrete output mode on the external component.

•When using the headphones, you can listen to the front channel sounds (left and right) only.

•Surround and DSP modes (see pages 25 and 28) cannot be applied to “DVD MULTI.”

For RX-5040B/RX-5042S/RX-5045B

DVD VCR TV SOUND CD TAPE/CDR FM/AM

SOURCE NAME

On the front panel

TAPE/CDR CD DVD

FM/AM TV SOUND VCR

On the remote

Note:

When connecting a CD recorder to the TAPE/CDR jacks, change the

source name shown on the display. For details, see page 14.

11