JVC RX-6500VBK manual Basic Operations, Turning the Power On and Off Standby, On the front panel

Page 11

English

Basic Operations

The following operations are commonly used when you play any sound source.

Turning the Power On and Off (Standby)

On the front panel:

STANDBY

To turn on the power, press POWER.

The STANDBY lamp goes off. The name of the

current source (or station frequency) appears on the display.

Current source name appears

POWER

Current volume level is shown here

To turn off the power (into standby mode),

STANDBY

press POWER again.

The STANDBY lamp lights up. A small amount POWER of power is consumed in standby mode. To turn

DVD

Select the DVD player for viewing the stereo

 

digital video disc.

TV SOUND/DBS

Select the TV sound (or the DBS tuner).

VCR

Select the video component connected to the

 

VCR jacks.

CD *

Select the CD player.

TAPE/MD *

Select the cassette deck (or the MD recorder).

PHONO *

Select the turntable.

FM/AM *

Select an FM or AM broadcast.

the power off completely, unplug the AC power cord.

•Each time you press the button, the band alternates between FM and AM.

From the remote control:

AUDIO

Notes:

To turn on the power, press AUDIO POWER. The STANDBY lamp goes off. The name of the current source (or station frequency) appears on the display.

•When connecting an MD recorder (to the TAPE/MD jacks) or a DBS tuner (to the TV SOUND/DBS jacks), change the source name that appears on the display. See page 11 for details.

•When you press one of the source selecting buttons on the remote control marked above with an asterisk (*), the receiver automatically turns on.

To turn off the power (into standby mode),

press AUDIO POWER again. The STANDBY lamp lights up.

Selecting the Source to Play

Press one of the source selecting buttons.

On the front panel:

DVD

TV SOUND/DBS

VCR

 

 

SOURCE NAME

 

 

CD

TAPE/MD

PHONO

FM/AM

 

SOURCE NAME

 

 

From the remote control:

DVD TVSOUND/DBS VCR

CD

PHONO

Signal and speaker indicators on the display

•The signal indicators light up to indicate the incoming channel signals.

– Only the indicators for the incoming signals light up. (When analog input is selected, “L” and “R” always light up.)

•The frame of the signal indicator (except for “LFE”: See notes below) lights up if the corresponding speaker is set to “LARGE” or “SMALL” (for subwoofer, “YES”).

L C R

SUBWFR LFE

LS S RS

L:Light up when the left front channel signal comes in. The frame of this signal indicator always lights up.

R:Light up when the right front channel signal comes in.

The frame of this signal indicator always lights up.

C:Light up when the center channel signal comes in. LS: Light up when the left rear channel signal comes in. RS: Light up when the right rear channel signal comes in.

S:Light up when the monaural rear channel signal comes in. LFE: Light up when the LFE channel signal comes in.

Notes:

TAPE/MD

FM/AM

• When the LFE channel signal comes in, “LFE” lights up.

•When “SUBWOOFER” is set to “YES,” (See page 15) SUBWFR lights up.

8

Page 10 Page 12
Image 11
Page 10 Page 12
Contents RX-6500VBK Errata Sheet For U.S.A Table of Contents To use the Multi Cursor buttons w on the front panel Front Panel Remote ControlParts Identification @ Û # ÜGetting Started Before InstallationConnecting the FM and AM Antennas Checking the Supplied AccessoriesConnecting the rear and center speakers Connecting the SpeakersBasic connecting procedure Connecting the front speakersAudio component connections Connecting Audio/Video ComponentsConnecting the subwoofer speaker Analog connectionsIf your audio components have an AV Compu Link terminal Video component connectionsDVD player VCRBattery cover Connecting the Power CordPutting Batteries in the Remote Control On the back of the remote control, removeBasic Operations Turning the Power On and Off StandbyFrom the remote control Signal and speaker indicators on the displayMuting the Sound Selecting the Front SpeakersReinforcing the Bass Adjusting the Subwoofer Output LevelAttenuating the Input Signal Adjusting the ToneChanging the Source Name Basic SettingsAdjusting the Front Speaker Output Balance Recording a SourceFront SPK Front Speaker Setting the Speakers for the DSP ModesPress Setting repeatedly until Rear Delay appears on DisplaySelect the appropriate item about Compression level LFE ATT Low Frequency Effect Attenuator appears on DisplaySelect the low frequency effect Attenuator level Range COMP. Dynamic Range Compression appears on DisplayOn the front panel Digital Input Digital in Terminal SettingPress Multi Cursor @/ #to select an appropriate setting Selecting the Analog or Digital Input ModeUsing the Sleep Timer Setting the Subwoofer InformationStoring the Basic Settings Adjustments One Touch Operation Receiving Radio Broadcasts Tuning in Stations ManuallyUsing Preset Tuning When an FM stereo broadcast is hard to receive or noisy Select a preset channel stationPress 10 keys to select a preset channel number To tune in a preset stationDAP modes Using the DSP Modes3D-PHONIC modes DTS Digital Surround Headphones modeSurround modes Dolby Surround Dolby Digital and Dolby Pro LogicFront Available DSP Modes According to the Speaker ArrangementAdjusting the DAP Modes Headphones mode Adjusting the 3D-PHONIC ModesAdjusting the Surround Modes Press Test to check the speaker output balance Appropriate Surround modePress Test again to stop the test Test tone Press Surround to activete anPress Effect to select an effect Press Test again to stop the test toneSelect and play a sound source Activating the DSP ModesPress Surround so that Lamp next to the button lights upSynchronized Recording Compu Link Remote Control SystemRemote Control through the Remote Sensor on the Receiver Same timeCASE3 AV Compu Link Remote Control SystemCASE1 CASE2One-Touch DVD Play Automatic Selection of TV’s Input ModeAutomatic Power On/Off One-Touch Video PlayCD player Operating JVC’s Audio/Video ComponentsSound control section Amplifier TurntableREC Pause CD player-changerCassette deck MD recorderOperating Other Manufacturers’ Video Equipment Release TV PowerTry to operate your TV by pressing TV Power If there are more than one code listed for your brand of TVManufacturer Codes Release VCR PowerTry to operate your VCR by pressing VCR Power Release CATV/SAT PowerProblem Possible Cause Solution TroubleshootingHarmonic distortion SpecificationsPer channel, min. RMS, driven into 8 Ω Hz to 20 kHz with no more than 0.8% totalGeneral FM tuner IHFAM tuner 1099 781 954 650Valley Road Wayne, NJ Limited Warranty AUDIO-2 1299HIMMDWJEIN

RX-6500VBK specifications

The JVC RX-6500VBK is a versatile and powerful audio receiver designed to enhance your home theater experience. This model stands out due to its impressive combination of features, technology, and connectivity options, catering to both casual listeners and audiophiles alike.

At the core of the RX-6500VBK is its robust amplification system, which delivers an impressive power output of 100 watts per channel across multiple channels. This allows it to drive a variety of speaker configurations, whether you are using a simple stereo setup or a more complex surround sound system. The receiver ensures a dynamic and clear sound reproduction, enabling users to enjoy their favorite movies and music with immersive audio quality.

One of the hallmark features of the RX-6500VBK is its support for various audio formats, including Dolby Digital, DTS, and more, allowing users to experience high-definition surround sound. This makes it an ideal choice for those who want to recreate a cinema-like experience at home. The unit is also equipped with sophisticated digital signal processing that optimizes audio output based on the acoustics of your room.

In terms of connectivity, the RX-6500VBK excels with multiple HDMI inputs and outputs, making it easy to connect a range of devices, from gaming consoles to Blu-ray players and streaming devices. The HDMI ARC (Audio Return Channel) feature allows for a simplified connection to compatible TVs, ensuring that audio from the television can be channeled back to the receiver without additional cables.

In addition to HDMI, the RX-6500VBK includes analog and digital audio inputs, as well as USB ports for direct playback from flash drives. The inclusion of Bluetooth technology allows for wireless streaming from smartphones and tablets, providing added convenience for users who wish to enjoy their music collections without the hassle of wires.

Furthermore, the receiver integrates with various smart home ecosystems, facilitating voice control and automation features. The user-friendly interface, complete with an on-screen display, makes navigating through different settings and options straightforward.

For music lovers, the RX-6500VBK supports high-resolution audio formats, ensuring that every nuance of your favorite tracks is heard clearly. With its combination of power, advanced technology, and connectivity options, the JVC RX-6500VBK stands as a compelling choice for anyone looking to elevate their audio setup. Whether for movies, music, or gaming, this receiver aims to deliver an exceptional sonic experience that caters to a wide range of entertainment needs.
Top Page Image Contents