JVC RX-6500VBK manual Release VCR Power, Try to operate your VCR by pressing VCR Power, Nec

Page 35

English

To change the transmittable signals for

To change the transmittable signals for

operating another manufacturer’s VCR

operating a CATV converter or satellite tuner

1.Press and hold VCR POWER.

2.Press VCR.

3.Enter manufacturer’s code (two digits) using

buttons 1–9, and 0.

See the list below to find the code.

Examples: For a PANASONIC product, press 0, then 7. For a MITSUBISHI product, press 1, then 3.

4. Release VCR POWER.

Following button can be used for operating the VCR:

VCR POWER: Turns on and off the VCR.

After pressing VCR, you can perform the following operations on the VCR:

VCR CH +/–:

Changes the TV channels on the VCR.

3:

Starts playback.

1:

Rewinds a video tape.

Á:

Fast winds a video tape.

7:

Stops operation.

8:

Pauses. To resume playing, press 3.

REC PAUSE:

Pauses recording temporarily.

Note:

Refer to the manual supplied with your VCR.

5. Try to operate your VCR by pressing VCR POWER.

When your VCR turns on or off, you have entered the correct code.

If there are more than one code listed for your brand of VCR,

try each one until the correct one is entered.

Manufacturer

Codes

Manufacturer

Codes

 

 

 

 

Emerson

11

Philips

09

Fisher

29

RCA

05, 06

Funai

10, 14, 15, 16

Samsung

24

 

 

 

 

GoldStar

12

Sanyo

21, 22, 23

Hitachi

04

Sharp

27, 28

JVC

01, 02, 03

Shinton

30

Mitsubishi

13

Sony

18, 19, 20

 

 

 

 

NEC

25

Toshiba

26

Panasonic

07, 17

Zenith

08

 

 

 

 

Manufacturers’ codes are subject to change without notice. If they are changed, this remote control cannot operate the equipment.

1.Press and hold CATV/SAT POWER.

2.Press CATV CONTROL.

3.Enter manufacturer’s code (two digits) using

buttons 1–9, and 0.

See the list below to find the code.

Examples: For a JVC product, press 1, then 4.

For a SONY product, press 2, then 0.

4. Release CATV/SAT POWER.

Following button can be used for operating the CATV converter or the satellite tuner:

CATV/SAT POWER: Turns on and off the CATV converter or satellite tuner.

After pressing CATV CONTROL, you can perform the following operations on the equipment:

CATV CH +/–:

Changes the channels.

1 – 9, 0, 100+ (+10):

Selects the channel.

 

100+ (+10) button will function as the

 

ENTER button if your equipment

 

requires pressing ENTER after

 

selecting a channel number.

RETURN:

Alternates between previously selected

 

channel and the current channel.

Note:

Refer to the manual supplied with your CATV converter or satellite

tuner.

5. Try to operate your CATV converter or satellite tuner by pressing CATV/SAT POWER.

When your CATV converter or satellite tuner turns on or off, you have entered the correct code.

If there are more than one code listed for your brand of

CATV converter or satellite tuner, try each one until the correct one is entered.

Manufacturer

Codes

Manufacturer

Codes

Hamlin

15, 16, 17, 18

RCA

19

 

 

 

 

Jerrold

01, 02, 03, 04,

Scientific Atranta

09, 10

 

05, 06, 07, 08

 

 

 

Sony

20

 

 

 

 

Pioneer

13, 14

Zenith

11, 12

Manufacturers’ codes are subject to change without notice. If they are changed, this remote control cannot operate the equipment.

32

Page 34 Page 36
Image 35
Page 34 Page 36
Contents RX-6500VBK Errata Sheet For U.S.A Table of Contents To use the Multi Cursor buttons w on the front panel Front Panel Remote ControlParts Identification @ Û # ÜGetting Started Before InstallationConnecting the FM and AM Antennas Checking the Supplied AccessoriesConnecting the rear and center speakers Connecting the SpeakersBasic connecting procedure Connecting the front speakersAudio component connections Connecting Audio/Video ComponentsConnecting the subwoofer speaker Analog connectionsIf your audio components have an AV Compu Link terminal Video component connectionsDVD player VCRBattery cover Connecting the Power CordPutting Batteries in the Remote Control On the back of the remote control, removeBasic Operations Turning the Power On and Off StandbyFrom the remote control Signal and speaker indicators on the displayMuting the Sound Selecting the Front SpeakersReinforcing the Bass Adjusting the Subwoofer Output LevelAttenuating the Input Signal Adjusting the ToneChanging the Source Name Basic SettingsAdjusting the Front Speaker Output Balance Recording a SourceFront SPK Front Speaker Setting the Speakers for the DSP ModesPress Setting repeatedly until Rear Delay appears on DisplaySelect the appropriate item about Compression level LFE ATT Low Frequency Effect Attenuator appears on DisplaySelect the low frequency effect Attenuator level Range COMP. Dynamic Range Compression appears on DisplayOn the front panel Digital Input Digital in Terminal SettingPress Multi Cursor @/ #to select an appropriate setting Selecting the Analog or Digital Input ModeUsing the Sleep Timer Setting the Subwoofer InformationStoring the Basic Settings Adjustments One Touch Operation Receiving Radio Broadcasts Tuning in Stations ManuallyUsing Preset Tuning When an FM stereo broadcast is hard to receive or noisy Select a preset channel stationPress 10 keys to select a preset channel number To tune in a preset stationDAP modes Using the DSP Modes3D-PHONIC modes DTS Digital Surround Headphones modeSurround modes Dolby Surround Dolby Digital and Dolby Pro LogicFront Available DSP Modes According to the Speaker ArrangementAdjusting the DAP Modes Headphones mode Adjusting the 3D-PHONIC ModesAdjusting the Surround Modes Press Test to check the speaker output balance Appropriate Surround modePress Test again to stop the test Test tone Press Surround to activete anPress Effect to select an effect Press Test again to stop the test toneSelect and play a sound source Activating the DSP ModesPress Surround so that Lamp next to the button lights upSynchronized Recording Compu Link Remote Control SystemRemote Control through the Remote Sensor on the Receiver Same timeCASE3 AV Compu Link Remote Control SystemCASE1 CASE2One-Touch DVD Play Automatic Selection of TV’s Input ModeAutomatic Power On/Off One-Touch Video PlayCD player Operating JVC’s Audio/Video ComponentsSound control section Amplifier TurntableREC Pause CD player-changerCassette deck MD recorderOperating Other Manufacturers’ Video Equipment Release TV PowerTry to operate your TV by pressing TV Power If there are more than one code listed for your brand of TVManufacturer Codes Release VCR PowerTry to operate your VCR by pressing VCR Power Release CATV/SAT PowerProblem Possible Cause Solution TroubleshootingHarmonic distortion SpecificationsPer channel, min. RMS, driven into 8 Ω Hz to 20 kHz with no more than 0.8% totalGeneral FM tuner IHFAM tuner 1099 781 954 650Valley Road Wayne, NJ Limited Warranty AUDIO-2 1299HIMMDWJEIN

RX-6500VBK specifications

The JVC RX-6500VBK is a versatile and powerful audio receiver designed to enhance your home theater experience. This model stands out due to its impressive combination of features, technology, and connectivity options, catering to both casual listeners and audiophiles alike.

At the core of the RX-6500VBK is its robust amplification system, which delivers an impressive power output of 100 watts per channel across multiple channels. This allows it to drive a variety of speaker configurations, whether you are using a simple stereo setup or a more complex surround sound system. The receiver ensures a dynamic and clear sound reproduction, enabling users to enjoy their favorite movies and music with immersive audio quality.

One of the hallmark features of the RX-6500VBK is its support for various audio formats, including Dolby Digital, DTS, and more, allowing users to experience high-definition surround sound. This makes it an ideal choice for those who want to recreate a cinema-like experience at home. The unit is also equipped with sophisticated digital signal processing that optimizes audio output based on the acoustics of your room.

In terms of connectivity, the RX-6500VBK excels with multiple HDMI inputs and outputs, making it easy to connect a range of devices, from gaming consoles to Blu-ray players and streaming devices. The HDMI ARC (Audio Return Channel) feature allows for a simplified connection to compatible TVs, ensuring that audio from the television can be channeled back to the receiver without additional cables.

In addition to HDMI, the RX-6500VBK includes analog and digital audio inputs, as well as USB ports for direct playback from flash drives. The inclusion of Bluetooth technology allows for wireless streaming from smartphones and tablets, providing added convenience for users who wish to enjoy their music collections without the hassle of wires.

Furthermore, the receiver integrates with various smart home ecosystems, facilitating voice control and automation features. The user-friendly interface, complete with an on-screen display, makes navigating through different settings and options straightforward.

For music lovers, the RX-6500VBK supports high-resolution audio formats, ensuring that every nuance of your favorite tracks is heard clearly. With its combination of power, advanced technology, and connectivity options, the JVC RX-6500VBK stands as a compelling choice for anyone looking to elevate their audio setup. Whether for movies, music, or gaming, this receiver aims to deliver an exceptional sonic experience that caters to a wide range of entertainment needs.
Top Page Image Contents