JVC RX-6500VBK manual Press Test again to stop the test Test tone, Press Surround to activete an

Page 26

4.Adjust the speaker output levels.

•To adjust the center speaker level, press CNTR –/+ (from –10 dB to +10 dB).

•To adjust the left rear speaker level, press REAR•L –/+ (from –10 dB to +10 dB).

•To adjust the right rear speaker level, press REAR•R –/+ (from –10 dB to +10 dB).

CNTR

3 4

REAR•L

5 6

ENTER

REAR•R

JVC Theater Surround adjustments

Before you start, remember...

•Make sure that you have set the speaker information correctly (see page 12).

•There is a time limit in doing the following steps. If the setting is canceled before you finish, start from step 1 again.

•You cannot adjust the rear speaker output levels when you have set “REAR SPK” to “NONE.” See page 12.

•You cannot adjust the center speaker output level and center tone when you have set “CENTER SPK” to “NONE.” See page 12.

English

7/P 8

5. Press TEST again to stop the test TEST tone.

On the front panel:

You can also use the buttons on the front panel to adjust the Surround modes. However, no test tone is available when using the buttons on the front panel. So, make adjustments while listening to the sound of the source played back.

1. Press SURROUND to activete an

SURROUND

appropriate Surround mode —

 

PRO LOGIC, DOLBY DIGITAL

 

From the remote control:

1.Press SURROUND MODE repeatedly until “THEATER” appears on the display.

•The Ù PRO LOGIC and DSP indicators also light up on the display.

2.Press SOUND.

The 10 keys are activated for sound adjustments.

3. Press TEST to check the speaker output balance.

“TEST TONE L” starts flashing on the display, and a test tone comes out of the speakers in the following order:

SURROUND

MODE

SOUND

TEST

or DTS SURROUND.

•Each time you press the button, the Surround mode turns on and off alternately.

•When “PRO LOGIC” is selected, the Ù PRO LOGIC indicator lights up on the display.

 

TEST TONE L

 

TEST TONE C

 

TEST TONE R

 

 

(Left front speaker)

 

(Center speaker)

 

(Right front speaker)

 

 

TEST TONE LS

 

TEST TONE RS

 

 

(Left rear speaker)

 

(Right rear speaker)

 

 

Notes:

2.Adjust the speaker output levels.

1)Press ADJUST repeatedly until one of the following indications appears on the display.

“CENTER LEVEL”:

To adjust the center speaker level. “REAR L LEVEL”:

To adjust the left rear speaker level. “REAR R LEVEL”:

To adjust the right rear speaker level.

•Once you have pressed ADJUST, MULTI CURSOR %/ Þcan be also used for selecting the speaker.

2)Press MULTI CURSOR @/ # to adjust the selected speaker output level (from –10 dB to +10 dB).

3)Repeat 1) and 2) to adjust the other speaker output levels.

ADJUST

MULTI CURSOR

•You can adjust the speaker output levels without outputting the test tone.

•No test tone comes out of the center speaker when “CENTER SPK” is set to “NONE” (see page 12).

•No test tone comes out of the rear speakers when “REAR SPK” is set to “NONE” (see page 12).

23

Page 25 Page 27
Image 26
Page 25 Page 27
Contents RX-6500VBK Errata Sheet For U.S.A Table of Contents @ Û # Ü Front Panel Remote ControlParts Identification To use the Multi Cursor buttons w on the front panelChecking the Supplied Accessories Before InstallationConnecting the FM and AM Antennas Getting StartedConnecting the front speakers Connecting the SpeakersBasic connecting procedure Connecting the rear and center speakersAnalog connections Connecting Audio/Video ComponentsConnecting the subwoofer speaker Audio component connectionsVCR Video component connectionsDVD player If your audio components have an AV Compu Link terminalOn the back of the remote control, remove Connecting the Power CordPutting Batteries in the Remote Control Battery coverSignal and speaker indicators on the display Turning the Power On and Off StandbyFrom the remote control Basic OperationsSelecting the Front Speakers Muting the SoundAdjusting the Tone Adjusting the Subwoofer Output LevelAttenuating the Input Signal Reinforcing the BassRecording a Source Basic SettingsAdjusting the Front Speaker Output Balance Changing the Source NameRear Delay appears on Display Setting the Speakers for the DSP ModesPress Setting repeatedly until Front SPK Front SpeakerRange COMP. Dynamic Range Compression appears on Display LFE ATT Low Frequency Effect Attenuator appears on DisplaySelect the low frequency effect Attenuator level Select the appropriate item about Compression levelSelecting the Analog or Digital Input Mode Digital Input Digital in Terminal SettingPress Multi Cursor @/ #to select an appropriate setting On the front panelUsing the Sleep Timer Setting the Subwoofer InformationStoring the Basic Settings Adjustments One Touch Operation Receiving Radio Broadcasts Tuning in Stations ManuallyUsing Preset Tuning To tune in a preset station Select a preset channel stationPress 10 keys to select a preset channel number When an FM stereo broadcast is hard to receive or noisyDAP modes Using the DSP Modes3D-PHONIC modes Dolby Surround Dolby Digital and Dolby Pro Logic Headphones modeSurround modes DTS Digital SurroundAvailable DSP Modes According to the Speaker Arrangement FrontAdjusting the 3D-PHONIC Modes Adjusting the DAP Modes Headphones modeAdjusting the Surround Modes Press Surround to activete an Appropriate Surround modePress Test again to stop the test Test tone Press Test to check the speaker output balancePress Test again to stop the test tone Press Effect to select an effectLamp next to the button lights up Activating the DSP ModesPress Surround so that Select and play a sound sourceSame time Compu Link Remote Control SystemRemote Control through the Remote Sensor on the Receiver Synchronized RecordingCASE2 AV Compu Link Remote Control SystemCASE1 CASE3One-Touch Video Play Automatic Selection of TV’s Input ModeAutomatic Power On/Off One-Touch DVD PlayTurntable Operating JVC’s Audio/Video ComponentsSound control section Amplifier CD playerMD recorder CD player-changerCassette deck REC PauseIf there are more than one code listed for your brand of TV Release TV PowerTry to operate your TV by pressing TV Power Operating Other Manufacturers’ Video EquipmentRelease CATV/SAT Power Release VCR PowerTry to operate your VCR by pressing VCR Power Manufacturer CodesTroubleshooting Problem Possible Cause SolutionHz to 20 kHz with no more than 0.8% total SpecificationsPer channel, min. RMS, driven into 8 Ω Harmonic distortionGeneral FM tuner IHFAM tuner 1099 781 954 650Valley Road Wayne, NJ Limited Warranty AUDIO-2 1299HIMMDWJEIN

RX-6500VBK specifications

The JVC RX-6500VBK is a versatile and powerful audio receiver designed to enhance your home theater experience. This model stands out due to its impressive combination of features, technology, and connectivity options, catering to both casual listeners and audiophiles alike.

At the core of the RX-6500VBK is its robust amplification system, which delivers an impressive power output of 100 watts per channel across multiple channels. This allows it to drive a variety of speaker configurations, whether you are using a simple stereo setup or a more complex surround sound system. The receiver ensures a dynamic and clear sound reproduction, enabling users to enjoy their favorite movies and music with immersive audio quality.

One of the hallmark features of the RX-6500VBK is its support for various audio formats, including Dolby Digital, DTS, and more, allowing users to experience high-definition surround sound. This makes it an ideal choice for those who want to recreate a cinema-like experience at home. The unit is also equipped with sophisticated digital signal processing that optimizes audio output based on the acoustics of your room.

In terms of connectivity, the RX-6500VBK excels with multiple HDMI inputs and outputs, making it easy to connect a range of devices, from gaming consoles to Blu-ray players and streaming devices. The HDMI ARC (Audio Return Channel) feature allows for a simplified connection to compatible TVs, ensuring that audio from the television can be channeled back to the receiver without additional cables.

In addition to HDMI, the RX-6500VBK includes analog and digital audio inputs, as well as USB ports for direct playback from flash drives. The inclusion of Bluetooth technology allows for wireless streaming from smartphones and tablets, providing added convenience for users who wish to enjoy their music collections without the hassle of wires.

Furthermore, the receiver integrates with various smart home ecosystems, facilitating voice control and automation features. The user-friendly interface, complete with an on-screen display, makes navigating through different settings and options straightforward.

For music lovers, the RX-6500VBK supports high-resolution audio formats, ensuring that every nuance of your favorite tracks is heard clearly. With its combination of power, advanced technology, and connectivity options, the JVC RX-6500VBK stands as a compelling choice for anyone looking to elevate their audio setup. Whether for movies, music, or gaming, this receiver aims to deliver an exceptional sonic experience that caters to a wide range of entertainment needs.
Top Page Image Contents