JVC RX-6500VBK manual LFE ATT Low Frequency Effect Attenuator appears on Display

Page 16

Crossover Frequency Setting

Small speaker cannot reproduce the bass sound very well. So, if you have used a small speaker any for the front, center, or rear channels, this receiver automatically reallocates the bass elements, originally assigned to the channel for which you have connected the small speaker, to another channel (for which you have connected the large speaker).

If you have selected “LARGE” for all speakers (see page 12), this function will not take effect. To use this function properly, you need to set this crossover frequency level according to the size of the small speaker connected.

This function takes effect in the following cases:

-When playing a source using Dolby Pro Logic, Dolby Digital, or DTS Digital Surround.

-When using the DAP modes.

Low Frequency Effect Attenuator Setting

If the bass sound is distorted while playing back a source using Dolby Digital or DTS Digital Surround, follow the procedure below.

•This function takes effect only when the subwoofer (LFE) signals come in. (with “SUBWOOFER” set to “Yes.”)

On the front panel ONLY:

1. Press SETTING repeatedly until

SETTING

 

“LFE ATT” (Low Frequency

 

Effect Attenuator) appears on the

 

display.

 

•Once you have pressed SETTING, MULTI CURSOR %/ Þ can be also used for selecting “LFE ATT.”

•The display changes to show the current setting.

English

On the front panel ONLY:

1. Press SETTING repeatedly until “CROSSOVER FRQ” (Crossover Frequency) appears on the display.

SETTING

2. Press MULTI CURSOR @/ #to

MULTI CURSOR

select the low frequency effect

 

attenuator level.

 

• As you press it, the display changes to show the following:

•Once you have pressed SETTING, MULTI CURSOR %/ Þ can be also used for selecting “CROSSOVER FRQ.”

•The display changes to show the current setting.

MULTI CURSOR

2.Press MULTI CURSOR @/ #to select the crossover frequency level according to the size of the small speaker connected.

• As you press it, the display changes to show the following:

80Hz100Hz120Hz

• Use the following comments as reference when adjusting.

80Hz: Select this when the cone speaker unit built in the speaker is about 12 cm.

100Hz: Select this when the cone speaker unit built in the speaker is about 10 cm.

120Hz: Select this when the cone speaker unit built in the speaker is about 8 cm.

0dB 10dB

0dB: Normally select this.

10dB: Select this when the bass sound is distorted.

Dynamic Range Compression Setting

You can compress the dynamic range (difference between maximum sound and minimum sound) of the reproduced sound. This is useful when enjoying surround sound at night.

•This function takes effect only when playing back a source using Dolby Digital.

On the front panel ONLY:

1. Press SETTING repeatedly until

SETTING

“D. RANGE COMP.” (Dynamic

 

Range Compression) appears on

 

the display.

 

•Once you have pressed SETTING, MULTI CURSOR %/ Þ can be also used for selecting “D. RANGE COMP.”

•The display changes to show the current setting.

2. Press MULTI CURSOR @/ #to

MULTI CURSOR

 

select the appropriate item about

 

the compression level.

 

• As you press it, the display changes to show the following:

OFF MID MAX

OFF: Select this when you want to enjoy surround with its full dynamic range. (No effect applied)

MID: Select this when you want to reduce the dynamic range a little. (Factory setting)

MAX: Select this when you want to apply the compression effect fully. (Useful at night)

13

Page 15 Page 17
Image 16
Page 15 Page 17
Contents RX-6500VBK Errata Sheet For U.S.A Table of Contents Front Panel Remote Control Parts Identification@ Û # Ü To use the Multi Cursor buttons w on the front panelBefore Installation Connecting the FM and AM AntennasChecking the Supplied Accessories Getting StartedConnecting the Speakers Basic connecting procedureConnecting the front speakers Connecting the rear and center speakersConnecting Audio/Video Components Connecting the subwoofer speakerAnalog connections Audio component connectionsVideo component connections DVD playerVCR If your audio components have an AV Compu Link terminalConnecting the Power Cord Putting Batteries in the Remote ControlOn the back of the remote control, remove Battery coverTurning the Power On and Off Standby From the remote controlSignal and speaker indicators on the display Basic OperationsSelecting the Front Speakers Muting the SoundAdjusting the Subwoofer Output Level Attenuating the Input SignalAdjusting the Tone Reinforcing the BassBasic Settings Adjusting the Front Speaker Output BalanceRecording a Source Changing the Source NameSetting the Speakers for the DSP Modes Press Setting repeatedly untilRear Delay appears on Display Front SPK Front SpeakerLFE ATT Low Frequency Effect Attenuator appears on Display Select the low frequency effect Attenuator levelRange COMP. Dynamic Range Compression appears on Display Select the appropriate item about Compression levelDigital Input Digital in Terminal Setting Press Multi Cursor @/ #to select an appropriate settingSelecting the Analog or Digital Input Mode On the front panelStoring the Basic Settings Adjustments One Touch Operation Setting the Subwoofer InformationUsing the Sleep Timer Using Preset Tuning Tuning in Stations ManuallyReceiving Radio Broadcasts Select a preset channel station Press 10 keys to select a preset channel numberTo tune in a preset station When an FM stereo broadcast is hard to receive or noisy3D-PHONIC modes Using the DSP ModesDAP modes Headphones mode Surround modesDolby Surround Dolby Digital and Dolby Pro Logic DTS Digital SurroundAvailable DSP Modes According to the Speaker Arrangement FrontAdjusting the 3D-PHONIC Modes Adjusting the DAP Modes Headphones modeAdjusting the Surround Modes Appropriate Surround mode Press Test again to stop the test Test tonePress Surround to activete an Press Test to check the speaker output balancePress Test again to stop the test tone Press Effect to select an effectActivating the DSP Modes Press Surround so thatLamp next to the button lights up Select and play a sound sourceCompu Link Remote Control System Remote Control through the Remote Sensor on the ReceiverSame time Synchronized RecordingAV Compu Link Remote Control System CASE1CASE2 CASE3Automatic Selection of TV’s Input Mode Automatic Power On/OffOne-Touch Video Play One-Touch DVD PlayOperating JVC’s Audio/Video Components Sound control section AmplifierTurntable CD playerCD player-changer Cassette deckMD recorder REC PauseRelease TV Power Try to operate your TV by pressing TV PowerIf there are more than one code listed for your brand of TV Operating Other Manufacturers’ Video EquipmentRelease VCR Power Try to operate your VCR by pressing VCR PowerRelease CATV/SAT Power Manufacturer CodesTroubleshooting Problem Possible Cause SolutionSpecifications Per channel, min. RMS, driven into 8 ΩHz to 20 kHz with no more than 0.8% total Harmonic distortionAM tuner FM tuner IHFGeneral Valley Road Wayne, NJ 781 954 6501099 Limited Warranty AUDIO-2 1299HIMMDWJEIN

RX-6500VBK specifications

The JVC RX-6500VBK is a versatile and powerful audio receiver designed to enhance your home theater experience. This model stands out due to its impressive combination of features, technology, and connectivity options, catering to both casual listeners and audiophiles alike.

At the core of the RX-6500VBK is its robust amplification system, which delivers an impressive power output of 100 watts per channel across multiple channels. This allows it to drive a variety of speaker configurations, whether you are using a simple stereo setup or a more complex surround sound system. The receiver ensures a dynamic and clear sound reproduction, enabling users to enjoy their favorite movies and music with immersive audio quality.

One of the hallmark features of the RX-6500VBK is its support for various audio formats, including Dolby Digital, DTS, and more, allowing users to experience high-definition surround sound. This makes it an ideal choice for those who want to recreate a cinema-like experience at home. The unit is also equipped with sophisticated digital signal processing that optimizes audio output based on the acoustics of your room.

In terms of connectivity, the RX-6500VBK excels with multiple HDMI inputs and outputs, making it easy to connect a range of devices, from gaming consoles to Blu-ray players and streaming devices. The HDMI ARC (Audio Return Channel) feature allows for a simplified connection to compatible TVs, ensuring that audio from the television can be channeled back to the receiver without additional cables.

In addition to HDMI, the RX-6500VBK includes analog and digital audio inputs, as well as USB ports for direct playback from flash drives. The inclusion of Bluetooth technology allows for wireless streaming from smartphones and tablets, providing added convenience for users who wish to enjoy their music collections without the hassle of wires.

Furthermore, the receiver integrates with various smart home ecosystems, facilitating voice control and automation features. The user-friendly interface, complete with an on-screen display, makes navigating through different settings and options straightforward.

For music lovers, the RX-6500VBK supports high-resolution audio formats, ensuring that every nuance of your favorite tracks is heard clearly. With its combination of power, advanced technology, and connectivity options, the JVC RX-6500VBK stands as a compelling choice for anyone looking to elevate their audio setup. Whether for movies, music, or gaming, this receiver aims to deliver an exceptional sonic experience that caters to a wide range of entertainment needs.
Top Page Image Contents