JVC RX-6500VBK manual Digital Input Digital in Terminal Setting, On the front panel

Page 17

English

Digital Input (DIGITAL IN) Terminal

Setting

When you use the digital input terminals, you have to register what components are connected to which terminals (DIGITAL IN 1/2/3).

Before you start, remember...

•There is a time limit in doing the following steps. If the setting is canceled before you finish, start from step 1 again.

1.Follow the steps in “Digital Input (DIGITAL IN) Terminal Setting” to the left.

2.Press the source selecting button (CD, TAPE/MD, TV SOUND/DBS, or DVD) for which you want to change the input mode from analog input to digital input.

DVD TVSOUND/DBS

DVD

TV SOUND/DBS

On the front panel ONLY:

1. Press SETTING repeatedly until

SETTING

SOURCE NAME

CDTAPE/MD

SOURCE NAME

CD

“DIGITAL IN” appears on the

display.

•Once you have pressed SETTING, MULTI CURSOR %/ Þ can be also used for selecting “DIGITAL IN.”

•The display changes to show the current setting.

DIGITAL 2 terminal setting

DIGITAL 1 terminal setting DIGITAL 3 terminal setting

TAPE/MD

On the front panel

On the remote control

3.Press ANALOG/DIGITAL repeatedly until the digital input mode you want appears on the display.

ANALOG/DIGITAL

ANALOG/DIGITAL

DIGITAL AUTO

 

On the front panel

On the remote control

2. Press MULTI CURSOR @/ #to select an appropriate setting.

MULTI CURSOR

Each time you press the button, the input mode changes as follows:

•As you press it, the display changes to show

the following:

1 DVD 2 CD 3 DBS

Ò

1 DVD 2 CD 3 MD

Ò

1 DVD 2 MD 3 DBS Ò

1 CD 2 DVD 3 DBS

Ò

1 CD 2 DVD 3 MD

Ò

1 CD 2 MD 3 DBS

Ò

1 DBS 2 CD 3 DVD

Ò

1 DBS 2 CD 3 MD

Ò

1 DVS 2 DVD 3 MD Ò

1 MD 2 CD 3 DBS

Ò

1 MD 2 CD 3 DVD

Ò

1 MD 2 DVD 3 DBS Ò

(back to the beginning)

 

 

 

 

 

 

Note:

When shipped from the factory, the DIGITAL IN terminals can be used as the digital input for the following components.

•DIGITAL 1 (coaxial): For DVD player

•DIGITAL 2 (optical): For CD player

•DIGITAL 3 (optical): For DBS tuner

Selecting the Analog or Digital Input Mode

When you have connected some digital source components using the digital terminals (see page 7), you need to change the input mode for these components to the appropriate digital input mode correctly — AUTO/PCM, DOLBY DIGITAL, or DTS.

Once the correct mode is selected for each digital source component, the mode is memorized until you change it.

ANALOG AUTO/PCM

(Digital)

DTS DOLBY DIGITAL

(Digital)(Digital)

Normally select “AUTO/PCM,” so the receiver automatically detects the incoming digital signal. The DIGITAL AUTO indicator lights up on the display. (The DIGITAL AUTO lamp next to the ANALOG/DIGITAL button lights up.)

-When the receiver can recognize the digital signal coming into the receiver, the frame of the digital signal indicator for the detected signal lights up automatically.

-When the receiver cannot recognize the incoming signal correctly, the frame of the digital signal indicator flashes. If this happens, select the same digital input mode with the incoming digital signal — either “DOLBY DIGITAL” or “DTS.”

Notes:

•Noise may come out of the speakers while searching or skipping a multi-sound source encoded with Dolby Digital or DTS Digital Surround. If this happens, select “DOLBY DIGITAL” or “DTS” for digital input mode. (See above)

•When you change the source, the digital input mode will be automatically reset to “AUTO/PCM.”

14

Page 16 Page 18
Image 17
Page 16 Page 18
Contents RX-6500VBK Errata Sheet For U.S.A Table of Contents Parts Identification Front Panel Remote Control@ Û # Ü To use the Multi Cursor buttons w on the front panelConnecting the FM and AM Antennas Before InstallationChecking the Supplied Accessories Getting StartedBasic connecting procedure Connecting the SpeakersConnecting the front speakers Connecting the rear and center speakersConnecting the subwoofer speaker Connecting Audio/Video ComponentsAnalog connections Audio component connectionsDVD player Video component connectionsVCR If your audio components have an AV Compu Link terminalPutting Batteries in the Remote Control Connecting the Power CordOn the back of the remote control, remove Battery coverFrom the remote control Turning the Power On and Off StandbySignal and speaker indicators on the display Basic OperationsMuting the Sound Selecting the Front SpeakersAttenuating the Input Signal Adjusting the Subwoofer Output LevelAdjusting the Tone Reinforcing the BassAdjusting the Front Speaker Output Balance Basic SettingsRecording a Source Changing the Source NamePress Setting repeatedly until Setting the Speakers for the DSP ModesRear Delay appears on Display Front SPK Front SpeakerSelect the low frequency effect Attenuator level LFE ATT Low Frequency Effect Attenuator appears on DisplayRange COMP. Dynamic Range Compression appears on Display Select the appropriate item about Compression levelPress Multi Cursor @/ #to select an appropriate setting Digital Input Digital in Terminal SettingSelecting the Analog or Digital Input Mode On the front panelUsing the Sleep Timer Setting the Subwoofer InformationStoring the Basic Settings Adjustments One Touch Operation Receiving Radio Broadcasts Tuning in Stations ManuallyUsing Preset Tuning Press 10 keys to select a preset channel number Select a preset channel stationTo tune in a preset station When an FM stereo broadcast is hard to receive or noisyDAP modes Using the DSP Modes3D-PHONIC modes Surround modes Headphones modeDolby Surround Dolby Digital and Dolby Pro Logic DTS Digital SurroundFront Available DSP Modes According to the Speaker ArrangementAdjusting the DAP Modes Headphones mode Adjusting the 3D-PHONIC ModesAdjusting the Surround Modes Press Test again to stop the test Test tone Appropriate Surround modePress Surround to activete an Press Test to check the speaker output balancePress Effect to select an effect Press Test again to stop the test tonePress Surround so that Activating the DSP ModesLamp next to the button lights up Select and play a sound sourceRemote Control through the Remote Sensor on the Receiver Compu Link Remote Control SystemSame time Synchronized RecordingCASE1 AV Compu Link Remote Control SystemCASE2 CASE3Automatic Power On/Off Automatic Selection of TV’s Input ModeOne-Touch Video Play One-Touch DVD PlaySound control section Amplifier Operating JVC’s Audio/Video ComponentsTurntable CD playerCassette deck CD player-changerMD recorder REC PauseTry to operate your TV by pressing TV Power Release TV PowerIf there are more than one code listed for your brand of TV Operating Other Manufacturers’ Video EquipmentTry to operate your VCR by pressing VCR Power Release VCR PowerRelease CATV/SAT Power Manufacturer CodesProblem Possible Cause Solution TroubleshootingPer channel, min. RMS, driven into 8 Ω SpecificationsHz to 20 kHz with no more than 0.8% total Harmonic distortionGeneral FM tuner IHFAM tuner 1099 781 954 650Valley Road Wayne, NJ Limited Warranty AUDIO-2 1299HIMMDWJEIN

RX-6500VBK specifications

The JVC RX-6500VBK is a versatile and powerful audio receiver designed to enhance your home theater experience. This model stands out due to its impressive combination of features, technology, and connectivity options, catering to both casual listeners and audiophiles alike.

At the core of the RX-6500VBK is its robust amplification system, which delivers an impressive power output of 100 watts per channel across multiple channels. This allows it to drive a variety of speaker configurations, whether you are using a simple stereo setup or a more complex surround sound system. The receiver ensures a dynamic and clear sound reproduction, enabling users to enjoy their favorite movies and music with immersive audio quality.

One of the hallmark features of the RX-6500VBK is its support for various audio formats, including Dolby Digital, DTS, and more, allowing users to experience high-definition surround sound. This makes it an ideal choice for those who want to recreate a cinema-like experience at home. The unit is also equipped with sophisticated digital signal processing that optimizes audio output based on the acoustics of your room.

In terms of connectivity, the RX-6500VBK excels with multiple HDMI inputs and outputs, making it easy to connect a range of devices, from gaming consoles to Blu-ray players and streaming devices. The HDMI ARC (Audio Return Channel) feature allows for a simplified connection to compatible TVs, ensuring that audio from the television can be channeled back to the receiver without additional cables.

In addition to HDMI, the RX-6500VBK includes analog and digital audio inputs, as well as USB ports for direct playback from flash drives. The inclusion of Bluetooth technology allows for wireless streaming from smartphones and tablets, providing added convenience for users who wish to enjoy their music collections without the hassle of wires.

Furthermore, the receiver integrates with various smart home ecosystems, facilitating voice control and automation features. The user-friendly interface, complete with an on-screen display, makes navigating through different settings and options straightforward.

For music lovers, the RX-6500VBK supports high-resolution audio formats, ensuring that every nuance of your favorite tracks is heard clearly. With its combination of power, advanced technology, and connectivity options, the JVC RX-6500VBK stands as a compelling choice for anyone looking to elevate their audio setup. Whether for movies, music, or gaming, this receiver aims to deliver an exceptional sonic experience that caters to a wide range of entertainment needs.
Top Page Image Contents