ProForm PFTL71230 Assembly, Shown. Make sure that the Extension Legs 102 remain Uprights

Page 6

ASSEMBLY

Assembly requires two people. Set the treadmill in a cleared area and remove all packing materials. Do not dispose of the packing materials until assembly is completed. Assembly requires your own phillips screw-

driver and rubber mallet .

Note: The underside of the treadmill walking belt is coated with high-performance lubricant. During shipping, a small amount of lubricant may be transferred to the top of the walking belt or the shipping carton. This is a normal condition and does not affect treadmill performance. If there is lubricant on top of the walking belt, simply wipe off the lubricant with a soft cloth and a mild, non-abrasive cleaner.

For help identifying the assembly hardware, see the PART IDENTIFICATION CHART below.

3/4” Tek

1/2” Screw (67)–4

Latch Screw (74)–2

Screw (100)–6

 

 

1. With the help of a second person, carefully raise the

1

treadmill to the upright position as shown.

 

 

69

 

 

Insert one of the Extension Legs (102) into the treadmill as shown. Make sure that the Extension Leg is turned so the Base Pad (99) is on the bottom. If necessary, tip the Uprights (69) forward as you insert the Extension Leg.

Insert the other Extension Leg (not shown) in the same way.

 

 

102

 

 

99

2. With the help of a second person, carefully lower the

2

 

treadmill frame and then tip the Uprights (69) down as

 

 

 

shown. Make sure that the Extension Legs (102) remain

 

 

in the Uprights.

 

 

Attach each Extension Leg (102) with two 3/4” Screws

 

99

 

 

(100) as shown.

 

Frame

With the help of a second person, carefully tip the

 

69

Uprights (69) back to the vertical position.

 

 

69

100

Note: One replacement Base Pad (99) may be included.

102

 

Use the extra Base Pad if one becomes worn or needs to

99

100

be replaced.

 

102

 

 

6

Page 5 Page 7
Image 6
Page 5 Page 7
Contents
QUESTIONS? Model No. PFTL71230 Serial NoCustomer HOT Line Table of Contents Important Precautions Page Before YOU Begin Left Side Right SideAssembly Shown. Make sure that the Extension Legs 102 remain UprightsFoam Grip is inserted into the Console Base Pulse Operation and Adjustment HOW to Plug in the Power CordPerformant Lubetm Walking Belt Console Diagram Features of the ConsoleSelect the manual mode HOW to Turn on the PowerHOW to USE the Manual Mode Insert the key fully into the consoleMeasure your heart rate if desired Calories/Heart RateSpeed/Min-Mile display-This display Whenkey. you are finished exercising, removeHOW to USE Personal Trainer Programs Select one of the personal trainer programsStart the program Page HOW to Connect Your Portable Stereo HOW to Connect Your Home Stereo HOW to Connect Your ComputerInsert the key into the console HOW to Connect Your VCRAudio Adapter Cable PressVCR. the Play button on your CD player orSee on Connection Start your web browser, if HOW to USE Programs Directly from OUR WEB SiteGo to your computer and start an internet Lect a programInformation MODE/DEMO Mode Optional Hand WeightsOptional Chest Pulse Sensor HOW to Fold and Move the Treadmill HOW to Fold the Treadmill for StorageHOW to Move the Treadmill HOW to Lower the Treadmill for USE Troubleshooting Problem The power turns off during useTop Problem The thumb pulse sensor does not function properly Problem The walking belt slows when walked onWorkout Guidelines Conditioning GuidelinesExercise Intensity Exercise FrequencySuggested Stretches R903A Key Qty DescriptionOrdering Replacement Parts Limited WarrantyIcon Health & FITNESS, INC., 1500 S W., LOGAN, UT PFTL71230 Model No. PFTL71230
Top Page Image Contents