ProForm PFTL69505.0 user manual Assembly, Be careful not to damage the Wire Harness

Page 6

ASSEMBLY

To hire an authorized service technician to assemble the treadmill, call toll-free 1-800-445-2480. Assembly requires two persons. Set the treadmill in a cleared area and remove all packing materials. Do not dispose of the packing materials until assembly is completed. Note: The underside of the treadmill walking belt is coated with high-performance lubricant. During shipping, lubricant may be transferred to the top of the walking belt or the shipping carton. This is a normal condition and does not affect treadmill performance. If there is lubricant on top of the walking belt, simply wipe off the lubricant with a soft cloth and a mild, non-abrasive cleaner.

Assembly requires the included allen wrenches

and your own phillips screwdriver

,

wire cutters

, and adjustable wrench

.

 

For help identifying assembly hardware, see the drawings below. Note: If a part is not found in the part bags, check to see if the part has been preattached.

3/8” Star

1/4” Star Washer

Washer (122)–4

Wheel Nut (135)–2

1/2” Screw (52)–1

Washer (132)–4

(93)–8

 

 

 

3/4” Screw (33)–7

1” Tek Screw (126)–6

1/4” x 1” Bolt

5/16” x 1” Bolt

 

 

 

(117)–4

(113)–4

Wheel Bolt (134)–2

 

1/4” x 3 1/2” Bolt (123)–4

Upright Bolt (133)–4

 

3/8” x 3 1/2” Bolt (121)–2

1.With the help of a second person, carefully tip the tread- mill onto its left side. Partially fold the Frame (21) so that the treadmill is more stable. Do not fully fold the tread- mill until it is completely assembled.

Identify the Left Upright (111) and the Right Upright (119); the indicated brackets on the Uprights will overhang to- ward the center of the treadmill. Feed the Wire Harness (118) into the lower end of the Right Upright, and pull the Wire Harness out of the hole in the bracket on the Right Upright. Note: There may be a tie on the Wire Harness to help you pull it out of the hole.

Attach the Right Upright (119) to the right side of the Base (131) with two Upright Bolts (133) and two 3/8” Star Washers (132). Do not tighten the Upright Bolts yet.

Be careful not to damage the Wire Harness (118).

Attach the Left Upright (111) to the Base in the same way. Note: There is not a wire harness on the left side.

1

 

 

118

 

119

Brackets

131

111

 

21

132

 

 

133

6

Image 6
Contents QUESTIONS? Model No. PFTL69505.0 Serial NoCall TOLL-FREE Table of Contents Important Precautions Page Before YOU Begin Back Right SideAssembly Be careful not to damage the Wire HarnessPage Post 101 Ground Wires Pulse Connector 104 Console Assembly Bolts, tighten them HOW to Plug in the Power Cord Treadmill OperationPRE-LUBRICATED Walking Belt Console Diagram Features of the ConsoleHOW to Turn on the Power HOW to USE the Manual ModeDemo mode When you are finished exercising, removeAdjust the incline of the treadmill to the lowest Turn on the fan if desiredHOW to USE a Preset Program Select one of the four preset programsHOW to USE a Pulse Program Measure your heart rate if desiredSelect a pulse program If pulse program 6 is HOW to Connect Your MP3 Player or CD Player HOW to Connect Your Portable StereoAudio Cable HOW to Connect Your Home Stereo HOW to Connect Your ComputerHOW to Connect Your VCR Press the Play button on your MP3 player, CD Player, or VCRMeasure your heart rate if desired Directly from OUR WEB Site Follow the on-line instructions to start ProgramReturn to the treadmill and stand on the foot Information MODE/DEMO Mode Optional Chest Pulse SensorHOW to Fold and Move the Treadmill HOW to USE the Upper Body ArmsHOW to Fold the Treadmill for Storage HOW to Move the Treadmill HOW to Lower the Treadmill for USETroubleshooting Problem The power turns off during useProblem The walking belt slows when walked on TopProblem One of the upper body arms squeaks during use Workout Guidelines Exercise GuidelinesExercise Intensity Exercise FrequencySuggested Stretches R0605A Qty DescriptionQty Exploded DRAWING-Model No. PFTL69505.0 Exploded DRAWING-Model No. PFTL69505.0 HOW to Order Replacement Parts Limited WarrantyIcon Health & FITNESS, INC., 1500 S W., LOGAN, UT